Sponsored

GT350 Manifold Install on 18+ Question

BigBeed

Well-Known Member
Joined
Nov 11, 2015
Threads
28
Messages
261
Reaction score
143
Location
South Jersey
First Name
Dave
Vehicle(s)
2019 GT Premium 401a PP2
Hey all,

Getting ready to install a GT350 manifold on my 19 GT and I ordered the install kit from LMR. I checked out and then realized it said for 15-17. Will this kit work for an 18+ or is there another kit? I searched for a while but couldn't find anything about install on an 18+ Any help is appreciated.

Thanks,
Dave
Sponsored

 

kevinvan6000

Well-Known Member
Joined
Jan 22, 2019
Threads
25
Messages
341
Reaction score
356
Location
Ontario
Vehicle(s)
2020Mustang GT
Hey all,

Getting ready to install a GT350 manifold on my 19 GT and I ordered the install kit from LMR. I checked out and then realized it said for 15-17. Will this kit work for an 18+ or is there another kit? I searched for a while but couldn't find anything about install on an 18+ Any help is appreciated.

Thanks,
Dave
I have the GT350 manifold on my 2020 GT. I did not use the LMR install kit. You may need an adapter for the PCV valve if you bought the manifold new. The part you'll need is BR3Z-9F695-A - this will connect the factory pcv hose to the manifold. I also had to fab up a connection for the EVAP system. I used a brass pipe fitting threaded into the manifold so I could run the hose to the evap system, but I have seen others just block the port on the top of the manifold with a plug and then run the hose off one of the ports on the manifold like the pic below.

gt350 intake.webp
 
OP
OP
BigBeed

BigBeed

Well-Known Member
Joined
Nov 11, 2015
Threads
28
Messages
261
Reaction score
143
Location
South Jersey
First Name
Dave
Vehicle(s)
2019 GT Premium 401a PP2
I got my manifold second hand and its pretty complete. Even came with the fuel rail and TB. The LMR kit has a hose extension for the evap so I think I should be good. Any tips for the install?
 
OP
OP
BigBeed

BigBeed

Well-Known Member
Joined
Nov 11, 2015
Threads
28
Messages
261
Reaction score
143
Location
South Jersey
First Name
Dave
Vehicle(s)
2019 GT Premium 401a PP2
I have the GT350 manifold on my 2020 GT. I did not use the LMR install kit. You may need an adapter for the PCV valve if you bought the manifold new. The part you'll need is BR3Z-9F695-A - this will connect the factory pcv hose to the manifold. I also had to fab up a connection for the EVAP system. I used a brass pipe fitting threaded into the manifold so I could run the hose to the evap system, but I have seen others just block the port on the top of the manifold with a plug and then run the hose off one of the ports on the manifold like the pic below.
Also did you use a GT350 throttle body?
 

kevinvan6000

Well-Known Member
Joined
Jan 22, 2019
Threads
25
Messages
341
Reaction score
356
Location
Ontario
Vehicle(s)
2020Mustang GT
I used the Bullitt TB, which is basically the same as the GT350 one, but has the electronics to work with the 18+ and newer cars.
 
OP
OP
BigBeed

BigBeed

Well-Known Member
Joined
Nov 11, 2015
Threads
28
Messages
261
Reaction score
143
Location
South Jersey
First Name
Dave
Vehicle(s)
2019 GT Premium 401a PP2
Yeah I just figured that out last night that the GT350 TB is analog and not digital so I'm ordering a Bullitt TB tonight. A whole new TB is cheaper that the analog to digital converter lol.
Sponsored

 
 








Top