GRABBER LIME S550 MUSTANG thread

[WD Pro]

No filters, no editing etc (other than resizing) :

WD

Sponsored

 

[WD Pro]

And another - No filters, no editing etc (other than resizing) :

WD

 

[Chef jpd]

20220217144509_IMG_0959 by chefjpd, on Flickr

 

[clebrun11]

Got the ride out today so snapped a few pics.

 

[Chef jpd]

Took a little road trip to a farm in the Hamptons.

20220430_121131 by chefjpd, on Flickr

 

[Coyote 2121]

And another - No filters, no editing etc (other than resizing) :

WD

Looks GREAT!
Is it stock ride height?

 

[WD Pro]

Looks GREAT!
Is it stock ride height?

Thank you

Yes, stock ride height. No suspension mods other than braces.

It’s a U.K. car which is PP1 spec but it also has Magneride which (unofficially) seems to let them sit just a little lower, check out these posts / threads :

https://www.mustang6g.com/forums/threads/magneride-vs-pp1-ride.135168/#post-2805750

https://www.mustang6g.com/forums/th...aussie-s550-today.44889/page-375#post-3384029

I do plan on lowering it just a little and I will use the Ford Performance full Magneride kit (M-9602-M). I think that kit takes it down by approximately 20mm / 0.75”

WD

 

[Coyote 2121]

Thank you

Yes, stock ride height. No suspension mods other than braces.

It’s a U.K. car which is PP1 spec but it also has Magneride which (unofficially) seems to let them sit just a little lower, check out these posts / threads :

https://www.mustang6g.com/forums/threads/magneride-vs-pp1-ride.135168/#post-2805750

https://www.mustang6g.com/forums/th...aussie-s550-today.44889/page-375#post-3384029

I do plan on lowering it just a little and I will use the Ford Performance full Magneride kit (M-9602-M). I think that kit takes it down by approximately 20mm / 0.75”

WD

Hey thanks.
My woman just bought a new 2021 GT (she was inspired by my exhaust note ) so I've had a chance to drive and ride in her totally stock Mustang, and mine is definitely a stiffer ride.
Not harsh at all, but corners much flatter, and all that good sports car stuff.
I measured our ride heights and mine is .75 inches (20mm) lower in front and .50 inches (12.7mm) lower in the rear.
Mine was bought used with 2900 miles so I know the original owner did SOMETHING to it!
Still trying to get it up on a lift so I can inspect things and try and figure out what springs and dampers he used.
I can see the front struts, and they're stamped FOMOCO.
But with lowering springs I wouldn't imagine the stock struts would ride as well as it does with the stiffer spring rates.
Tomorrow I'll have my new front tires and wheels mounted, with the wheels off I may be able to see the springs and get a number off them.
Have a great day!
I really can't believe anyone would buy a mustang that WASN'T Grabber Lime!
Just saying......
The pic is from a recent meet up for lunch and a movie.
The GT500 showed up while we were at lunch !

 

[clebrun11]

Thank you

Yes, stock ride height. No suspension mods other than braces.

It’s a U.K. car which is PP1 spec but it also has Magneride which (unofficially) seems to let them sit just a little lower, check out these posts / threads :

https://www.mustang6g.com/forums/threads/magneride-vs-pp1-ride.135168/#post-2805750

https://www.mustang6g.com/forums/th...aussie-s550-today.44889/page-375#post-3384029

I do plan on lowering it just a little and I will use the Ford Performance full Magneride kit (M-9602-M). I think that kit takes it down by approximately 20mm / 0.75”

WD

I don’t have the Magnaride but have the Ford Performance Street X Lowering Springs and the ride quality is excellent.

 

[clebrun11]

A couple pics freshly cleaned

 

[rothrj91]

My buddy drove his 2015 to work today. Got this pic at lunch. She definitely needs a wash, but finally got tint installed and put on new SVE SP2’s 19x10. Went with 20% rear, 35% sides, and 70% on the windshield. My buddy has a track pack kit installed on his and she’s a beauty in deep impact blue. Now to decide on what my next mod will be…

 

[WD Pro]

The limes flirting with each other …

Or are they squaring up … ? :

A few more from today :

WD

 

[WD Pro]

WD

 

[MAGS1]

WD

Such a cool color. Looks great!

 

[PurpleHaze]

Just wanted to post my new ride on the Grabber Lime thread! 2020 GT Premium vert, A10, Active Valve Exhaust, 3:55LS, 401A, Ford Safe and Smart. It only has 6,000 miles on it. I absolutely love this car. Ordered a 2022 and 2023 Mischievous Purple which were never scheduled. I am so glad they never built my car or I wouldn't have gotten this one.

Sponsored