Gearing

[whatsup62]

Can a M6 make it through the 1320' in 4th with 3.55's and 28" tall tires?

Sponsored

 

[Bkingnorth]

Can a M6 make it through the 1320' in 4th with 3.55's and 28" tall tires?

Yup. 115@ 6500. 133@ 7500

 

[jhatley7]

Yup. 115@ 6500. 133@ 7500

Yep. Well depending on power of course.

 

[whatsup62]

Yep. Well depending on power of course.

700rwhp
Was going to switch to 3.31's but i have a opportunity to go to 3.55's at no cost. Switching for my 3.73's including labor.

 

[jhatley7]

700rwhp
Was going to switch to 3.31's but i have a opportunity to go to 3.55's at no cost. Switching for my 3.73's including labor.

Yea you should be good. Depending on 60' and how fast you row them gears! Especially for free can't beat that.

 

[F1scamp]

I would go 3.31's. I have the 3.31's on the stock tires, similar power, I go through the traps at 7900-8000rpm according to the tach @ 135mph. You are going to want more power eventually which means more mph, give your self alittle wiggle room for growth.

 

[dubster99]

I'd figure you could get more than 135mph out of the 3.31's at high rpm. What size tire are you on?

 

[F1scamp]

I'd figure you could get more than 135mph out of the 3.31's at high rpm. What size tire are you on?

If you are asking me, stock 235 pzeros. Best time is 11.1 @ 135.3 going through the traps in 4th.

Sponsored