Fitment Question

[AlphaTheBum]

I’m on Eibach springs and want specs for 19 inch wheels for flush fitment. Thanks in advance!

Sponsored

 

[22MAVXLT]

I'm on Eibach's as well and when I had my stock 19's on I had 20mm spacers and it was completely flush in rear and it needed 25mm for the front to be completely flush. You can use this site to figure everything out...https://www.1010tires.com/Tools/Wheel-Offset-Calculator#

 

[AlphaTheBum]

Looking more for aftermarket offsets

 

[22MAVXLT]

I don't have 19s but still applies, I have 9" front with 22mm offset and 10" rears with 42mm offset. You can run 10" front with 35mm and 11" rear with 50mm. There are literally hundred of options.

 

[Joshinator99]

Looking more for aftermarket offsets

Just bought 19” Velgen VF5 wheels and was told their recommended fitment of 19x10 +34 front and 19x11 +52 rear is a flush fitment. Have not mounted them up yet so can’t confirm but doubt the manufacturer would make that claim if it wasn’t true. Won’t be hard to verify lol.

 

[AlphaTheBum]

Lmk how they fit when mounted

 

[stannypack]

I have 19x9.5 +22 squared and plan to lower it 1" with FRPP street springs, fronts will be flush rears will poke a bit

 

[chuckhammer]

I'm on 19x10 +35 front and 19x11.5 +56 rear with 285/35s and 325/30s. Looks flush to me. Installing 1" lowering springs and Bilstein B6s soon.

These tires are smaller in diameter than OEM 235/50-18 Pzeros by 0.4" and 0.6" front and rear. Made for very larger wheel/fender gaps (+0.2" and +0.3").

Sponsored