Sponsored

Fitment Question

degajake

Well-Known Member
Joined
Dec 24, 2021
Threads
17
Messages
50
Reaction score
35
Location
Florida
First Name
Jacob
Vehicle(s)
21 Mustang GT Premium 6MT
Does anyone know if this setup will work? I know that the rears will poke which I'm okay with, just curious if anyone has thrown a setup like this on their car and had rubbing issues or needed spacers? The car will be lowered on Eibach Sportlines. Thanks!
Screen Shot 2022-01-04 at 1.42.52 PM.webp
Sponsored

 

NightmareMoon

Well-Known Member
Joined
Nov 22, 2015
Threads
62
Messages
7,055
Reaction score
6,314
Location
Austin
Vehicle(s)
2016 Mustang GT PP w/ Voodoo
Vehicle Showcase
1
Front is fine, kinda conservative actually.

Rear is about an inch of poke. Clearly not designed for this chassis. Would probably hit the fenders if you’re lowered.
 

blind*guardian

Well-Known Member
Joined
Jul 20, 2019
Threads
5
Messages
153
Reaction score
79
Location
Reseda, CA
First Name
Mike
Vehicle(s)
2019 Mustang GT
Agree with the above...
 

Vert

Well-Known Member
Joined
Apr 20, 2018
Threads
12
Messages
364
Reaction score
231
Location
Indiana
Vehicle(s)
Whipped 19 GT Premium
Need at least a 50 offset on the rear to get it flush or to get tuck a little depending on run width and tire selection.
 
OP
OP
degajake

degajake

Well-Known Member
Joined
Dec 24, 2021
Threads
17
Messages
50
Reaction score
35
Location
Florida
First Name
Jacob
Vehicle(s)
21 Mustang GT Premium 6MT
Appreciate the feedback. I’m pretty set on that wheel, unfortunately they don’t offer another offset for 10.5. Because of that, what tire size would y’all recommend?
 

Sponsored

fmc_smt

Well-Known Member
Joined
Jun 4, 2018
Threads
39
Messages
1,293
Reaction score
2,622
Location
Cottonwood , Arizona
Vehicle(s)
2015 gt , 2015 Escape , 2015 F250
Vehicle Showcase
1
Going to throw my 2 cents in , the rears are out ........my set up . Granted 20 not 19 front 20 X 9.5 +35 255/35 rear 20×10.5 +45 305/30 . Lowered on sport lines , alignment set at stock . No rubs .

20211017_063101.jpg


20211016_054653.jpg


20211016_054803.webp
 

NightmareMoon

Well-Known Member
Joined
Nov 22, 2015
Threads
62
Messages
7,055
Reaction score
6,314
Location
Austin
Vehicle(s)
2016 Mustang GT PP w/ Voodoo
Vehicle Showcase
1
Appreciate the feedback. I’m pretty set on that wheel, unfortunately they don’t offer another offset for 10.5. Because of that, what tire size would y’all recommend?
Specifically, what wheel is it?
 

The Demon

Well-Known Member
Joined
Mar 3, 2021
Threads
167
Messages
3,528
Reaction score
5,946
Location
FL
First Name
Brett
Vehicle(s)
2022 Mach 1 N5809
Vehicle Showcase
1
Going to throw my 2 cents in , the rears are out ........my set up . Granted 20 not 19 front 20 X 9.5 +35 255/35 rear 20×10.5 +45 305/30 . Lowered on sport lines , alignment set at stock . No rubs .

20211017_063101.jpg


20211016_054653.jpg


20211016_054803.jpg
Nice look. I’m not lowered but I went close in the rear with a +50. In the front because I wanted staggered and going for stance I’m at 19x9.5 ET 30 Front, 20x11 ET 50 Rear.
 
OP
OP
degajake

degajake

Well-Known Member
Joined
Dec 24, 2021
Threads
17
Messages
50
Reaction score
35
Location
Florida
First Name
Jacob
Vehicle(s)
21 Mustang GT Premium 6MT
Specifically, what wheel is it?
It’s ESR CS11. I actually spoke with someone running the setup i mentioned and he’s on 265/35 and 285/35 with no issues.
 

luc

Well-Known Member
Joined
Mar 25, 2018
Threads
16
Messages
2,214
Reaction score
2,528
Location
CA
Vehicle(s)
2017 GT with PP
Does anyone know if this setup will work? I know that the rears will poke which I'm okay with, just curious if anyone has thrown a setup like this on their car and had rubbing issues or needed spacers? The car will be lowered on Eibach Sportlines. Thanks!
Screen Shot 2022-01-04 at 1.42.52 PM.webp
You must like understeering car…..
The Mustang need bigger tire in front, not in the back
 

Sponsored

NightmareMoon

Well-Known Member
Joined
Nov 22, 2015
Threads
62
Messages
7,055
Reaction score
6,314
Location
Austin
Vehicle(s)
2016 Mustang GT PP w/ Voodoo
Vehicle Showcase
1
It’s ESR CS11. I actually spoke with someone running the setup i mentioned and he’s on 265/35 and 285/35 with no issues.
Yeah the platform just isn’t set up for dished wheels like that.

with a stretched 285 and not too much drop (and maybe excessive camber) you can get it under the fender, but really, friends don’t let friends drive stanced cars with too much rear camber and stretched tires. With a 285, and prepared to adjust the rear camber to make up anu difference, it should work.

You lose straight line traction with more than about 2 degrees of rear camber and it starts to defeat the purpose of running wide tires or having 400 hp.
 
OP
OP
degajake

degajake

Well-Known Member
Joined
Dec 24, 2021
Threads
17
Messages
50
Reaction score
35
Location
Florida
First Name
Jacob
Vehicle(s)
21 Mustang GT Premium 6MT
Yeah the platform just isn’t set up for dished wheels like that.

with a stretched 285 and not too much drop (and maybe excessive camber) you can get it under the fender, but really, friends don’t let friends drive stanced cars with too much rear camber and stretched tires. With a 285, and prepared to adjust the rear camber to make up anu difference, it should work.

You lose straight line traction with more than about 2 degrees of rear camber and it starts to defeat the purpose of running wide tires or having 400 hp.
This is the car I am basing it off of. I love the look and didn’t think it looks like much camber at all.
34C35699-8B10-45C5-B055-EBE4E6400E85.jpeg
Sponsored

 
 








Top