ESS Centrifugal Mustang Superchargers

[devin2589]

DA was -400 this morning so I put back on the 120mm pulley went an tried for a new PB 60-130.

What catch can setup do you have?

Sponsored

 

[Brad1810r80]

That one was JLT but it's not great for boost, I run an ebay vented catch can now.

What catch can setup do you have?

 

[devin2589]

That one was JLT but it's not great for boost, I run an ebay vented catch can now.

Thanks for the heads up. Just finished installing my kit and trying to decide between vented or closed catch can. What issue did you have?

 

[rolfe.oliver]

Here is a good example of an ESS G3X putting in good work. Alex talks about the setup in the video, but it is a G3X, 1050x injectors, BAP, 120mm pulley on Sunoco 260GT. 60-130 in 6.88. Pretty damn impressive results.

 

[Mechanicus5.0]

Just curious if ESS will also be having a Black Friday sale?

I know they price at wholesale Direct, but you never know. Thanks in advance!

 

[BigD94]

Just curious if ESS will also be having a Black Friday sale?

I know they price at wholesale Direct, but you never know. Thanks in advance!

They said in the FB group that they were not.

 

[DougS550]

Thanks for the heads up. Just finished installing my kit and trying to decide between vented or closed catch can. What issue did you have?

Hey, which system are you installing. I ready to purchase a kit but I don't like to see people still having issues with their setup. Is their not One company FI system which when installed and tuned as per instructions, Does not have any issues with

 

[Brad1810r80]

There is zero issues with the kit, he’s asking about catch can setup.

Hey, which system are you installing. I ready to purchase a kit but I don't like to see people still having issues with their setup. Is their not One company FI system which when installed and tuned as per instructions, Does not have any issues with

 

[Proshop]

Hey, which system are you installing. I ready to purchase a kit but I don't like to see people still having issues with their setup. Is their not One company FI system which when installed and tuned as per instructions, Does not have any issues with

I haven’t had a single issue since installing my kit. I may have wreaked havoc on my trans with all the power going through it and busted a weld on muffler but the ESS kit runs like a champ and does just as it should!

 

[DougS550]

I haven’t had a single issue since installing my kit. I may have wreaked havoc on my trans with all the power going through it and busted a weld on muffler but the ESS kit runs like a champ and does just as it should!

Thanks, who did you get for your tune?

 

[Proshop]

Thanks, who did you get for your tune?

Wengerd he did my Roush and ESS for me.

 

[DougS550]

Wengerd he did my Roush and ESS for me.

What specifics mods/upgrades with the engine, fuel system etc have you done? I am gathering as much data as I can so I take into consideration for what will work for my application. Thank you for your help.

 

[Proshop]

What specifics mods/upgrades with the engine, fuel system etc have you done? I am gathering as much data as I can so I take into consideration for what will work for my application. Thank you for your help.

2021 PP1 A10/ ESS Tuning G3x SC/100mm pulley 13psi/Wengerd Performance E85 Tune/ Radium Fuel Rails/ ID1050x Injectors / Triple Aeromotive 450 Return Fuel System /UPR Dual Catch Can/ Reische 170/ Stainless Power LTH’s/Borla ATAK Catback/ BMR Drag Springs/ Steeda Stop the Hop Kit/Forgestar F14 Drag/ MT Et Street SS 305/45 R17s

 

[DougS550]

2021 PP1 A10/ ESS Tuning G3x SC/100mm pulley 13psi/Wengerd Performance E85 Tune/ Radium Fuel Rails/ ID1050x Injectors / Triple Aeromotive 450 Return Fuel System /UPR Dual Catch Can/ Reische 170/ Stainless Power LTH’s/Borla ATAK Catback/ BMR Drag Springs/ Steeda Stop the Hop Kit/Forgestar F14 Drag/ MT Et Street SS 305/45 R17s

Thanks. So you did not Upgrade your OPG/CS? How well does it start, idle and cruise in town? Is the power lenier at WOT from start?
Thank you

 

[TexasMetallic5.0]

They’re not a must-do mod. If you stay off the rev limiter or a 2-step, they’ll last the life of the engine. Centrifugal superchargers create a very linear power curve.

Sponsored