ecoboost track setup

[TRACK-STANG]

Hay guys new here was curious as to how strong niche wheels are I plan on traking my ecoboost to (road coarse) but I wanted to know if they could hold up to the stress these wheels in perticular http://www.nicheroadwheels.com/form-m158-w-20332.htm if not I would appreciate any budget wheels that can hold up to racing

Sponsored

 

[Anthony]

I had a set of niche wheels ordered.

I didn't buy them after holding at them. The machine work wasn't very nice imo. Kinda half done. Very sharp edges that could have been easily machined away

 

[TRACK-STANG]

Thanks for the heads up on niche wheels do you know of any other wheels up to 300 a piece that can hold up

 

[McCarthy]

Bump your budget $50 a wheel and get Forgestar F14's in 18x10. Anything larger than 18" wheels are going to hurt your performance on a road course.

 

[Chameleon]

SVE drift.

 

[TRACK-STANG]

Are there any that look like this http://www.nicheroadwheels.com/form-m158-w-20332.htm

 

[Chameleon]

HRE but their way over 300.

 

[TRACK-STANG]

HRE but their way over 300.

:eyebulge: yeah they are but they do look nice

 

[Chameleon]

Yes they do.

 

[Chameleon]

Not as many spokes but these are nice as well.

http://www.tsw.com/alloy_wheels_bathurst.php

 

[Anthony@HTM]

Look into a set of nice used wheels. I wouldn't waste your hard earned money on cheap track wheels. I've seen guys coming back into the paddock after going over a burm with hairline cracks in a spoke or two.

Enkei makes some nice wheels that I've had great luck with and they are fairly inexpensive I believe forgestar is fairly affordable too.

18x10+40 square seems like the sweet spot for a nice track setup

 

[TRACK-STANG]

I was thinking that but I've searched craigslist with pretty much no luck

 

[TRACK-STANG]

I was already trying that route searching craigslist with pretty much no luck is there other places to buy wheels in good condition ?

 

[TRACK-STANG]

Plus is it better to run squared stance or staggered? The widths of the rim

 

[Need4SpeedMotors]

I would run the square setup for track use this way you can rotate as well. Let me know if I can help you out in anyway.

Sponsored