DIY Dome Light Cutoff Switch

[Rael]

Thank you for joining Bearstang. Welcome. Great informational introduction!

Sponsored

 

[mfk2910]

Thanks again for sharing this diy guide. I was able to do it with parts I got from Amazon. Total spent $30. The hardest and shittiest part of this install is getting the damn dome housing off. It was actually painful to my fingers and felt like I was pulling on a rock with sand paper sides. It was really painful lol. Otherwise following the guide was pretty straight forward and the wiring was made easy with the tools/parts I got. The pictures are really all you need and as long as you follow the op pictures you can't mess this up. here is a link to all the tools and parts I needed. I didn't include the T10 torx screwdriver as that is a pretty common house tool lol:

https://www.amazon.com/gp/product/B00004WLKC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B086Z2Y1D6/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B086V5M1B4/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0746H2K6G/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1