I wondered this too, thanks for bringing it up.Any info the completion of the door Leds?
I wired mine to the parking lights circuit. They come on at night and when you open the doors, for a certain amount of time.I purchased the raxiom footwell light kit and want to wire it to be on while i am driving (at night mostly). does anyone know Where i would wire this to?
Hey guys!I wondered this too, thanks for bringing it up.
Looks like pumxee has not posted on the forum since May 17th, so who knows what he has been up to.
Doug
Hey,I want these lights on while I'm driving. Will this fuse do that? If not, where should I tap in? I need specifics on location/color of the wire.
Hey,
If you don't connect the power wire to the parking circuit then you can turn it on off whenever. Even in the day while the sun is out! I mentioned the fuse to use in the first post!
Does that answer your question?
If you want it to be automatic you have to connect it to the parking lamp wire in the BCM connector. It's the purple and white wire I believe. I didn't want to cut into it myself because it was such a tight connection and im still a notable noob. I just used the fuse insteadI was looking for it to be automatic, but I think ill go with this, I might not want it on all the time anyway.
Thanks!
Hey guys!
Ive been busy moving and stuff so never actually got down to do it. Wiring in the door LED's is super easy but the only thing Ive been having trouble with is getting the wiring from the vehicle through the door. I see no way of doing that without drilling through the door or something.