Dash trim panel removal

[Mustang_Eh]

Hey guys,

I've been searching on the forums and youtube, but can't seem to find any info on this - need help removing the driver side dash trim piece.

I found info about removing the main dash piece (drop glove box > pop side panel > pop the trim piece), but no info on *where to start* popping off the drive side piece. From what I gathered the clips are extremely brittle and I'd like to avoid breaking any.

If you have a good starting point it would be helpful.

Sponsored

 

[soldier989]

Its the same idea as the passenger side. Start by pulling the thin piece off, then you'll need to take a screw (7mm I believe) out for the headlight switch bezel. Then pull on the headlight switch bezel.

 

[brandonsmash]

Just start off on the far right side. Grip firmly and pull straight towards you. It's surprisingly easy.

When I had mine off last time I also attached flocking tape to the edges and loop tape to the interior to dampen any future rattles, but I'm pretty sensitive to unwanted noises.

EDIT:

I misread this and thought you were pulling the passenger side. I haven't pulled the driver's side.

 

[Mustang_Eh]

Its the same idea as the passenger side. Start by pulling the thin piece off, then you'll need to take a screw (7mm I believe) out for the headlight switch bezel. Then pull on the headlight switch bezel.

Is this the bolt that needs to get removed?

 

[Coconut]

^Yes, remove that bolt and use a pry tool to remove that piece.

 

[Mustang_Eh]

Thank you.

Sponsored