Confirmation needed on sub wiring

[Hilfloskind]

Hey there folks!

I just swapped the sub on my 2018 Shaker Pro system for a second time. I originally put in an RF Punch, but it was defective. Today I installed a Pioneer sub to replace it.

Now that I've swapped the sub twice, I just want to get a gut check on the wiring inside the enclosure going to the DVCs. Can someone confirm that the wires with the white stripes are the negative wires? There are red and blue wire sets, both of which have a wire with and without a white stripe.

Can someone confirm if the white striped wires are the negative wires?

Thanks!

Sponsored

 

[m3incorp]

Hey did you ever get your question answered?

 

[Hilfloskind]

Hey did you ever get your question answered?

Unfortunately not.

 

[m3incorp]

The Shaker system wires look to be different colors than the ones to the B/O subwoofer setup. In my setup, it is Black and Purple wires go to the negative input.
Yellow and Green wires positive.

 

[Hilfloskind]

The Shaker system wires look to be different colors than the ones to the B/O subwoofer setup. In my setup, it is Black and Purple wires go to the negative input.
Yellow and Green wires positive.

Not surprised at all. Thanks for checking your wiring either way!

Sponsored