Building from ground up

[Steve8989]

I want to do this the right way with adding a supercharger. What all do I need done to engine/rear before adding a supercharger. Looking to get around 900rwhp. Right now everything is stock minus PMAS velocity cold air and J&L driver/passenger catch cans. 2016 gt/cs. Advice greatly welcomed ty.

Sponsored

 

[daSNAK3]

Fuel system (pumps, lines, rails, etc... e85 compatible), Injectors (ID1050X, FIC1000, or bigger if you plan to turn it up in the future).

Some will tell you to do Oil Pump Gears, crank sprocket and all that.

As for the rear, I suppose that depends on what you plan to use the car for exactly.. if it is going to the drag strip, I would guess you would want better axles and driveshaft..

 

[Steve8989]

Want it to be kept as my daily driver, but be able to be very fast for roll races at meets and the occasional track fun. Going to be my new project for the next couple years. I see so many mustangs have say a big turbo or supercharger with little to no supporting mods and that just seems like a very expensive fuck up at some point. Rather avoid all of that and do everything.

 

[Gnatsum21]

As you mentioned already, anything that will keep the car planted and straight when you floor it. I have a bunch of Steeda upgrades under my car and must say I feel pretty secure/comfortable with those.

 

[KingKona]

You need to throw the Steeda IRS/cradle parts book at your rear suspension.

For a start.

 

[Steve8989]

You need to throw the Steeda IRS/cradle parts book at your rear suspension.

For a start.

Sounds good, thank you. Those will be in the next batch of parts I'm ordering this week. Now I just need to find a good reputable shop to get it all installed.

 

[larr12]

Send @tj@steeda a dm with your goals and he will guide you with the suspension parts that you will need.

 

[DougS550]

I want to do this the right way with adding a supercharger. What all do I need done to engine/rear before adding a supercharger. Looking to get around 900rwhp. Right now everything is stock minus PMAS velocity cold air and J&L driver/passenger catch cans. 2016 gt/cs. Advice greatly welcomed ty.

Hey Steve, I am about to order my FI supportingupgrade mods and my FI system next week. Looks like we have the same expectations as to what we want. Keep us posted, I plan to do the same. Good Luck

 

[Austin1992]

Stick or auto? I did the steeda catalog in the rear, plus g force axles. Highly recommend a set of drag radials, I went 305 nitto 555r2, lot of others like Mickey Thompson street ss too. There’s a huge difference in traction between those and 275 Michelin ps4s

 

[tj@steeda]

Yes - feel free to reach out to me at tim@steeda & we can get you headed in the right direction!

Best,

TJ

 

[Steve8989]

Stick or auto? I did the steeda catalog in the rear, plus g force axles. Highly recommend a set of drag radials, I went 305 nitto 555r2, lot of others like Mickey Thompson street ss too. There’s a huge difference in traction between those and 275 Michelin ps4s

Automatic

 

[Steve8989]

Hey Steve, I am about to order my FI supportingupgrade mods and my FI system next week. Looks like we have the same expectations as to what we want. Keep us posted, I plan to do the same. Good Luck

Hell ya, that's awesome and will do.

 

[Steve8989]

Yes - feel free to reach out to me at tim@steeda & we can get you headed in the right direction!

Best,

TJ

Definitely will thank you. Out this week for work. When I get back I'll shoot you a message.

 

[DougS550]

Hell ya, that's awesome and will do.

Steve, I see your from indiana to? I live in Fishers. If you ever need help or anything, give me a shout.

Sponsored