BOV MAPTAP

[juan_tony1]

Does someone sell a kit where I can tap into the map sensor for vacuum? Like the one sold from cpe/turbosmart..dont need the cold side pipe if not I would of got the cpe kit. If not what all would I need to run an hks bov, I already bought the cold side pipe.

Sponsored

 

[Juben]

Cut the hard line between the top of the throttle body and VRS sensor on the intake manifold. Replace it with soft line and a vacuum tee. Boom, done.

 

[TunaFish15]

This.

 

[PewterCam]

I did mine in a similar fashion.

Its best not to use a block that taps into the sensor on the manifold because it throws off the readings from that sensor.

 

[Apwrx]

I've got a turbosmart one that I no longer need since I went big turbo. Message me if your interested

 

[Tune+]

You shouldn't be using a map adapter for boost/vacuum source. I worked with Turbosmart directly to rectify the issue it caused and they have a new adapter that connects at the same point int he pictures above.

 

[ronv95]

You shouldn't be using a map adapter for boost/vacuum source. I worked with Turbosmart directly to rectify the issue it caused and they have a new adapter that connects at the same point int he pictures above.

http://www.americanmuscle.com/turbosmart-boost-reference-adapter-1516eco.html

 

[Tune+]

http://www.americanmuscle.com/turbosmart-boost-reference-adapter-1516eco.html

Exactly or you can do $2.00 at the auto parts store.

 

[juan_tony1]

Awesome thanks guys looks like ill take the 2.00 option lol

Sponsored