Better method for tightening strut nut

[GTP]

After 15 days the first socket I ordered from WM finally arrived. Turns out it measures the deepest yet at 11.8mm. About $7.

https://www.walmart.com/ip/3-8-inch-Drive-10mm-6-Point-Shallow-Socket-Cr-V-Steel/807252749

Sponsored

 

[fiveoboy01]

This also depends on what you are using for a strut nut.

For example, Vorshlag plates don't use a nylock nut. Run em down with an impact till they stop with tome loc-tite. I put cross check on the nut which will indicate if it's backing off.