ARH 1-7/8” Connection Question

[Willistylz]

Have a 19 PP2 with Steeda H-Pipe and Active Exhaust.

Found a great deal on brand new unopened set of ARH 1-7/8th Headers. Problem is they are the 3” direct connection to Corsa.
ARH Corsa Connect System

What parts do I need to mate the 3” to 2.5” for now?
Would something along the lines like this work, or anything similar?
3” Collector to 2.5”

Any links to adapters or advice would be greatly appreciated!

Thanks!

Sponsored

 

[Willistylz]

Bumping for help

 

[NGOT8R]

You can contact an exhaust shop or a machine shop to see if they can reduce it with a swaging machine, so that you don’t have to use adapters.

 

[Willistylz]

You can contact an exhaust shop or a machine shop to see if they can reduce it with a swaging machine, so that you don’t have to use adapters.

Thanks so much for this, didn’t know they had anything like that! Rather go that route instead of adding extra areas to leak/rust etc.

Sponsored