Anyone used spring spacers?

[Rpinaiii]

Perfect. Please post up your measurements. I’m curious to know. Might want to put a few miles on the car to let it settle out.

Ok. So I measured with BMR drag springs and 3/8 spacer, it measured out to driver rear at 28 1/4 and passenger 28 3/8. I put back in the BMR Performance springs and 3/8 spacer, clocked bushings and drove past two days and measured to 28 1/2 each side. I dont think the performance springs will settle anymore because they were already broken into my car, had them on for like a year before.

Looks like BMR drag springs drop 0.75 inches while Perfromance springs drop about 0.50 inches. Also on driver side my tire isn't rubbing like before. I'll keep an eye out and if they settle more and drop, I'll post again. Let me know what yours measures out since we have same size tires in rear.

Sponsored

 

[Off2jail]

Ok. So I measured with BMR drag springs and 3/8 spacer, it measured out to driver rear at 28 1/4 and passenger 28 3/8. I put back in the BMR Performance springs and 3/8 spacer, clocked bushings and drove past two days and measured to 28 1/2 each side. I dont think the performance springs will settle anymore because they were already broken into my car, had them on for like a year before.

Looks like BMR drag springs drop 0.75 inches while Perfromance springs drop about 0.50 inches. Also on driver side my tire isn't rubbing like before. I'll keep an eye out and if they settle more and drop, I'll post again. Let me know what yours measures out since we have same size tires in rear.

Hey man.

I appreciate that. I’ll measure it up when I get home. I’m offshore at the moment. I’ll post what measurements I had pre spring install. This is from the floor to the the wheel well opening. The alignment was off at the time, so there could be a small discrepancy.

Stock springs:
29 1/2”
29 3/8”

I’ll measure the distance when I get home and report back here. I measured it in the past, but I didn’t take a photo of it.

Shaun