Aftermarket Blinker/DRL Issues

[5.0Rooster]

Alright yall I recently purchased raxiom axial series led sequential turn signals for my mustang. They came in, I threw them on and the driver side worked perfectly. running light would come on when headlights were on and blinker worked. Now, passenger side blinker worked but the running light for what ever reason would not come on. Alright, oh well they sent a faulty one. Reached out to AM and they sent another one. Went through the same process and threw it on. Went and turned the car on and had the same results. Started to think I had a wiring issue so I rehook the stock blinker. Everything worked perfectly fine with it. Switched it back to the Raxiom one and still no running light. Does anyone have a clue on what could be wrong? I haven't reached out to AM yet because I'd like to believe they did not sent me another faulty one by mistake.

Sponsored

 

[Sycostang67]

I got a set of sequential turn signals for my car from CJPP and have a similar issue. The driver side works fine but the passenger side blinker will only flash if the marker lights are on. I got another set and they did the same thing. OEM blinker works fine. I really like the turn signals though so I just keep turning my lights on all the time. Just thought it odd that we both have issues with the same side of the car.

 

[VTECSAUCE]

Any answer to this? I am having the same issue with diode dynamics sequential front blinkers.

 

[SUPERFUZZ]

I put on a set of Raxiom the other day. The DRL part works fine but the amber turn signal does not. The amber part will flash on locking/unlocking but if I try and activate the turn signal using the stalk, the fog light on that side goes out and the amber turn signal does nothing. Reached out to Raxiom, got initial response saying it "sounds like a wiring issue" due to faulty harness and they may have to exchange them......*shrug* we'll see I guess.

 

[LexLuthr69]

I got a set of sequential turn signals for my car from CJPP and have a similar issue. The driver side works fine but the passenger side blinker will only flash if the marker lights are on. I got another set and they did the same thing. OEM blinker works fine. I really like the turn signals though so I just keep turning my lights on all the time. Just thought it odd that we both have issues with the same side of the car.

I'm having the same issue, but Opt7 brand lights. They work fine as Ling as the parking/headlights are on, but in Auto or off, the passenger side turn signal won't work and will then trigger a fault and then neither of the fronts will work. All the while, my factory tail lights still work correctly.

Anyone know of a fix? An inline resistor, separate feed for power?

Luke

 

[Sycostang67]

I ended up getting a harness from AM that keeps the front marker lights on with the DRL’s. It only works if you have sequencing front turn signals. Since that keeps the marker part on, my turn signals work without me having to turn the lights on manually. I can leave the lights in auto mode now and not have to run all my lights all the time.

 

[LexLuthr69]

Perfect! I'm about to order that and give it a shot! Thank you!

Sponsored