45 degree valve stems?

[ponie1992]

Anyone know if there are 45 degree valve stems available to work with our tpms sensors? I bought the real short straight ones, but believe they will still touch the calipers. 45 degree stems would be perfect.

Sponsored

 

[notstok5.0]

There is some info here: http://www.mustang6g.com/forums/showthread.php?t=48806&highlight=valve+stem

I would bet [MENTION=11685]Need4SpeedMotors[/MENTION] would have a solution for you, though.

 

[ponie1992]

There is some info here: http://www.mustang6g.com/forums/showthread.php?t=48806&highlight=valve+stem

I would bet [MENTION=11685]Need4SpeedMotors[/MENTION] would have a solution for you, though.

That's the thread I was looking for. Thanks!

 

[Need4SpeedMotors]

I mean I have shorty stems that are 1.73" total that includes the piece that connects to the unit so those should work.

 

[ponie1992]

I mean I have shorty stems that are 1.73" total that includes the piece that connects to the unit so those should work.

I have the short ones from lugnutguys, but they may still touch due to where they exit the wheel. I haven't installed one because I don't have the tool to do so. But, looking at it, it doesn't look good. Too bad the flush mount stems don't have a tpms mount. I'd be all over them.

Any way to disable the tpms?

 

[Need4SpeedMotors]

I have the short ones from lugnutguys, but they may still touch due to where they exit the wheel. I haven't installed one because I don't have the tool to do so. But, looking at it, it doesn't look good. Too bad the flush mount stems don't have a tpms mount. I'd be all over them.

Any way to disable the tpms?

No way I wouldnt recommend you disabling that its a safety tool bro, I mean it should clear by a few mm try it out it doesnt hurt.

 

[ponie1992]

No way I wouldnt recommend you disabling that its a safety tool bro, I mean it should clear by a few mm try it out it doesnt hurt.

I just need to find a tool to pull one through. As far as disabling the tpms, that wouldn't worry me one bit. I've only had two cars my entire life that have had the feature lol.

 

[ponie1992]

I found these, but they are out of stock. I've only found one source so far (coyote accessories). Can anyone help locate another source?


https://coyoteaccessories.com/897210tpms-1

 

[Need4SpeedMotors]

I just need to find a tool to pull one through. As far as disabling the tpms, that wouldn't worry me one bit. I've only had two cars my entire life that have had the feature lol.

Any local shop should have the tool to pull stems through

 

[ponie1992]

Ended up ordering a set of short mechanical stems from Grainger and will make my own tpms brackets. Should be fun lol.

 

[Need4SpeedMotors]

Ended up ordering a set of short mechanical stems from Grainger and will make my own tpms brackets. Should be fun lol.

Thats what im talking about lol !

 

[ponie1992]

I was hoping to get my wheels installed Friday, but my sensors won't be here til Thursday. I might be up late lol.

Sponsored