20X10 wheels upfront

[SK17]

Hello all. I want to get the FR500 deep dish wheels in 20x10/+43 offset/7.19 B.S on all 4 corners. I know they're fine on rear, will they be o.k up front. 2016 Mustang GT

Thanks!!!!!

Sponsored

 

[compprep]

A 10" and +42 will most likely require a spacer. Know you can't go much thicker than 5 or 6 mm as there will not be enough thread engagement. Then you require extended studs.

 

[Prodigal]

I’ve got 20x10.5” up front but they are +24. I do have .5” extended studs and the tires poke a little. Once I install the PP fender trim they will look perfect and be flush with the trim. I think a 10” wide wheel would be easier and look perfect. I just wanted to get a 305/30 tire up front.

 

[EFI]

You'll need a spacer for sure. You might be able to get away with a 6mm one and stay on the stock studs, but it will be really close. It will also depend on what size tires you go with.

 

[SK17]

Hey Guys. Thanks for the quick replies. I plan on putting the smallest tires up front that I can. I do a little bracket racing at the local drag strip. I just absolutely loved these wheels because of the deep dish aspect. I got tired of my previous ones. So even with smaller tires up front, you're thinking maybe 5mm spacers or not?

Jason

 

[EFI]

So even with smaller tires up front, you're thinking maybe 5mm spacers or not?

100%, the narrower tires will help but not when the lip of the wheel rubs on the strut.

 

[SK17]

I ordered 5mm Eibach spacers for the front. Do you guys think that I need to order the same spacers for the back so that the tires/rims match front to back?

J.D

Sponsored