20x10 Squared Setup. Will it fit?

[Kentarius2016]

What’s up folks?
I have been catching hell trying to find black rims for my 2018 Mustang GT PP1. The brembos make trying to get a full TRUE square setup hell. I want to be able to rotate my tires. I am going to run 285/35/20 tires. I didn’t want to use spacers, but at this point I don’t care.

SO my question: will I be able to get 20x10 farrada CM2 rims +40 offset ALL AROUND and put some type of spacers at the front to clear the brembos and have an overall flush or at least not a pokey setup? With no issues?This was the best I could think of...

Sponsored

 

[LarsenGrind]

I have a 2017 GT PP.
20x10 Niche Misano (+40 offset) squared with 275/295 tires.
On the front I have 5mm spacers.
I'm lowered and the rears rubbed a bit, as they were sitting super flush. So I had 5mm shaved off the baseplate on the rears so they now clear when driving over weird angles/steep ramps that puts most weight on one side.
I think Ur setup will work just fine.

 

[Chef jpd]

Must have 20's?

19x10 et 35 on all corners
275/40/19. Or 285/35/19
Perfect square fit. No spacers needed. Clears Brembo.

 

[Kentarius2016]

I have a 2017 GT PP.
20x10 Niche Misano (+40 offset) squared with 275/295 tires.
On the front I have 5mm spacers.
I'm lowered and the rears rubbed a bit, as they were sitting super flush. So I had 5mm shaved off the baseplate on the rears so they now clear when driving over weird angles/steep ramps that puts most weight on one side.
I think Ur setup will work just fine.

beautiful Thanks for the reassurance. I thought 5mm spacers would do it. Any other pics?

 

[Kentarius2016]

Must have 20's?

19x10 et 35 on all corners
275/40/19. Or 285/35/19
Perfect square fit. No spacers needed. Clears Brembo.

Yessir 20s

 

[04DarkShadowGT]

20x10 +40 on all four corners with 285/35/20 bridgestone tires. Fits great.

 

[Kentarius2016]

20x10 +40 on all four corners with 285/35/20 bridgestone tires. Fits great.

Pp1?

 

[OF5.0]

2019 PP1 with 20 x 10 +35 squared (285/35/20). No issues at all.

 

[04DarkShadowGT]

Pp1?

Base suspension with no modifications. I do plan on FRPP X springs shortly.

 

[LarsenGrind]

beautiful Thanks for the reassurance. I thought 5mm spacers would do it. Any other pics?

If You use Instagram, I have quite a few:
https://www.instagram.com/l4rs3ngr1nd/

 

[emcmtony]

I have 20x9.5 front and 20x11 back. 275/305 35zr20 tires. No need for anything special, they fit nicely. There is extra room in the front if needed.

 

[pappagray]

I too run 20x10 +35 285/35r20 on my PP1 2021 GT. IT is lowered on steeda sport springs also.

I also run 19x10 +35 295/35r19 for my road course wheels and they also fit fine.

CAmber at max OEM limit

 

[Velgen]

We had one of our employee's running a 20x10 all the way around slammed on coilers with no issues. No spacers were required either. Just bolt on & ride out!

 

[Aaron1085]

Don’t the GT350’s run 305 all around?

Sponsored