Bikeman315
Well-Known Member
- Joined
- Apr 12, 2015
- Threads
- 520
- Messages
- 15,285
- Reaction score
- 19,348
- Location
- Myrtle Beach, SC
- First Name
- Ira
- Vehicle(s)
- 2019 Mustang GT/CS, 2021 Volvo XC60
I'm on the configurator right now at it appears a lot of effort was put into this mistake, presuming it is one.Last post on this from me, but the configurator is screwed up-beyond what is excusable. For someone who doesn't know Mustangs in and out, it is misleading. If you just jump in and start building a Mach 1, the big main picture that is produced shows a base level M1 has the big wing with visible gaps from the handling pack on the back that you can attach a gurney flap to. Only if you look at the side pictures would you realize you get the small wing that is completely flat which is in the picture for the performance wing-very different from the big picture. So either the side bar is screwed up or the big picture is. I am betting that the base Mach 1s are still coming with the small one that is on mine. If that is the case, then the big picture for a base model should show the small wing. If you check the handling package, it should change to a HP Mach 1 with a big wing and the front splitter. Yes that might require some additional coding but a configurator website should show the right vehicle...at least for big things like a color, or a significant change like a big freaking spoiler.
So here is the standard Mach 1
Here it is with the handling package
Same spoiler. Only difference is the Gurney flap.
The listing for the HP spoiler is this.
And in the specs.
Man, that's a lot of "mistakes". But then again they also still list the Coyote HP and 460 & 480 so there's that.
Sponsored