2021 Mach 1 wheel offsets for the HP wheels?

[2021 Mach 1]

Very close to PP2 but not exact because of the rear tires being wider. All three are 10.5" front and 11" rear.

GT350 wheels are +30 front, +62 rear, 295/35-19 and 305/35-19.

PP2 wheels are +24 front, +48 rear, 305/30-19 square.

Mach HP wheels are +24 front, +52 rear, 305/30-19 and 315/30-19.

It's strange, some websites show the rear HP wheels with a +52 and others with a +48. But guys looking at their own factory installed rims are saying +52.

Ford Performance M-1007K-MACH1H Mach-1 Handling Wheels 19X10.5/19X11 (cjponyparts.com)

Ford Performance M-1007K-MACH1H Mustang Mach 1 Handling Pack Wheel Kit (15-23) (steeda.com)

Sponsored

 

[DRAGOON]

Actually mine are 52.5MM rear & 24MM front

 

[Charlemagne]

CJPonyparts has a typo there, all HP rear 11" wheels have 52.5 mm offset.

It's the same as non-HP Mach 1 rear 10" wheels that also have 52.5 mm offset.

 

[Mikepol2]

HP rear:

Non-HP rear:

 

[derklink]

Could one run Apex 19x11" ET26 https://apexwheels.com/vehicles/for...Size=19x11-et26&rearQty=2&rearSize=19x11-et52 in the front with 305s and no spacers without issues?

 

[RobZ71LM7]

Could one run Apex 19x11" ET26 https://apexwheels.com/vehicles/for...Size=19x11-et26&rearQty=2&rearSize=19x11-et52 in the front with 305s and no spacers without issues?

As long as you have enough negative camber yes. It's a common track setup-no different than any other S550. Or you can run a 50-52mm offset up front with a 1" spacer.

Sponsored