2013-14 Coyote Head Bolt Torque

[Ueberhopft]

Hi Forum,
Which is the required torque for the 2013-14 Coyote Head Bolts with the 11mm Bolts. I have only been able to find information about the earlier 12mm Bolts.

Thanks in advance

Ueberhopft

Sponsored

 

[Cory S]

Ford Mustang Cylinder Head Torque Specs : 18 ft-lbs + 30 ft-lbs + 90° + 90°

 

[Ueberhopft]

Hi Cory,
Where do you have this information from? Are you sure that that's the correct torque for the M11 Head Bolts. I am sorry that I am so OCD, but I come from germany so you can imagine how expensive it gets when something breaks.

Thanks in advance

Ueberhopft

 

[BlackandBlue]

I don’t know but you can search or purchase a factory service manual for you vehicle.

If you are OCD, having step by step directions along with every torque spec will be something you will greatly value.

Do your due diligence before downloading from random websites.

 

[Ueberhopft]

Hi Black and Blue,
Thank you for your suggestion. I already have the service manual but I am pretty sure that it is for the 2012 Mustang Gt with the 12mm Head Bolts, not for the 2013-14 Mustang Gt with the 11mm Head Bolts.
Could please anyone else verify the torque values stated above for the 11mm Head Bolts.

Thanks in advance

Ueberhopft

 

[Cory S]

Hi Cory,
Where do you have this information from? Are you sure that that's the correct torque for the M11 Head Bolts. I am sorry that I am so OCD, but I come from germany so you can imagine how expensive it gets when something breaks.

Thanks in advance

Ueberhopft

From what I’m seeing, since they are both TTY head bolts, they use the same sequence as the 12mm.

https://ford-specs.com/cars/2014/mustang5.0/torque-specs_engine.php

 

[wazslow]

Hi Black and Blue,
Thank you for your suggestion. I already have the service manual but I am pretty sure that it is for the 2012 Mustang Gt with the 12mm Head Bolts, not for the 2013-14 Mustang Gt with the 11mm Head Bolts.
Could please anyone else verify the torque values stated above for the 11mm Head Bolts.

Thanks in advance

Ueberhopft

11-14 are Gen 1 Coyotes, aren't they all the same? I thought they changed with Gen 2(15-17) and again with Gen 3(18-present).

 

[EFI]

11-14 are Gen 1 Coyotes, aren't they all the same? I thought they changed with Gen 2(15-17) and again with Gen 3(18-present).

11-12 are 12mm and long
13-17 are 11mm and short
18-23 went back to the same spec as 11-12

 

[wazslow]

11-12 are 12mm and long
13-17 are 11mm and short
18-23 went back to the same spec as 11-12

Good info, thank you!

 

[Ueberhopft]

I am thanking all of you for your replies.
I just called FRPP and asked them about the Torque values for the 11mm Head Bolts for the 2013/14 Gen1 Coyote Block.

1. 25Nm/18 lbft
2. 40Nm/30 lbft
3. 90°
4.90°

Hope you all have a great day.

Ueberhopft

Sponsored