11.60s in a full weight car N/A

[VIN666]

Details on the wheels?
What are they?

17x9.5 et 10 ?

Details please

Bump

Sponsored

 

[Mikeiscoo2]

ill be at Bradenton test and tune tomorrow night. hope maybe one of you guys show up to run a little.

 

[Mikeiscoo2]

11.66@117 with a 1.52 60ft on a 275/40/17 drag radial
Pump gas and 3870lbs with me in it.

whats the back spacing on your 17's? I want to buy a set of cobra R 17x9's from this guy and he says the spacing is 5.95 and I don't know if they will fit over my back brakes with the pp.

 

[esacteksab]

Details on the wheels?
What are they?

17x9.5 et 10 ?

Details please

FWIW, I just ordered a set of 17's from Blow-by-Racing. They normally stock them, but I took the last set of 17x10.5 rears and the fronts are back-ordered.

My car is a base GT. I did speak to Weld who said they'll clear base 4-piston brakes up front but won't clear the larger 6 piston brakes.

 

[VIN666]

Thanks. See sig, got my 17s sorted.

 

[esacteksab]

Thanks. See sig, got my 17s sorted.

Awesome. I went back and forth on whether or not to get 275/40/17 or 325/45/17

Chose the larger tire. Hope I don't regret it.

 

[VIN666]

Depends on et. On my wheels there would be no way.

 

[Sam@Coastal]

whats the back spacing on your 17's? I want to buy a set of cobra R 17x9's from this guy and he says the spacing is 5.95 and I don't know if they will fit over my back brakes with the pp.

the rears are 17x 10 with a 7.9 backspace

 

[Jeffy_2010]

Not to bring up an old thread but what radials where you running? And what was ur method of launch? I'm new to drag racing and trying to get some pointers

 

[KilluminatiDre]

I'm curious about this too. I plan on running slicks with DSS axles. I'm mainly curious about rpm to launch at for best results.

 

[USAF]

Is this a gas or E85 car? Those numbers and times are crazy...would love to get my car there.

 

[RBS550]

WOW!! AWESOME run!!

When I ran 3.73s I went through in 4th with only 6,500 rpms, but that's with an auto and 27" tall tires, running 11.40s, so I went back to stock 3.15s till I can find some 3.31s.

[ame]

[ame]

 

[KilluminatiDre]

what rpm are you guys with slicks launching at?

 

[RBS550]

what rpm are you guys with slicks launching at?

I'm on Mickey DRs with 20 psi, as you can hear in my videos I have an auto and launch just above idle and flash the 5c Circle D converter.

 

[jrsimon27]

OP at what rpms did you launch your car? Nice times for do little mods congrats.

Sponsored