1" spacers

[AMAlexLazarus]

Hey Alex, Don't know if this has already been asked but are there any plans of 20mm spacers from AM? I'm really on the fence about the 25mm with my 50yr AP wheels and tires poking, even if it's just a few millimeters. And I don't want to buy the 25mm spacers, put them on, not like the poke, and then lose money on return shipping and restocking fee. And the Eibachs and Garagelines are more expensive and the ones on Ebay say they will fit a '15 Mustang and yet have a center bore of 70.1, so I don't know if those are trustworthy.

Hey Murph - That's a really good question and I don't have a definitive answer on this as we speak. If there's enough buzz surrounding them we'll likely have them made.

Being said here in the event that you just wanted to give a set to try to test fit there's no way I'm going to split hairs about a re-stocking fee (That's not how I operate here!)

Like I said - If you want to order a set just to see what you think, drop the car on the ground to get a look and it's not something that you're after I'm here to take care of you and make the return and refund as painless as possible...Just like going to the dentist :cheers:

Keep me in the loop and I'm here to help.

Alex

Sponsored

 

[AMAlexLazarus]

Any idea if this 1" spacers would be compatible with 20 X 9 FOUNDRY wheels with 265/35 tires for the front and back, without any issues?

Hey Naeem - Welcome to Mustang6G. That's a great question and I don't believe that you would have any issue what so ever having them installed as they're designed to work with both factory and aftermarket wheels. If you've read through this entire thread I'm sure you'll see on page (1) that I had a little miscommunication on my end and was totally wrong about fitment but you should be good to go!

Don't hesitate to let me know if you're to have any other questions and I'm here to help!

Alex

 

[Arsenalslr95]

Look forward to these becoming avail again! My new AMR wheels from AM (thanks Alex!) arrive tomorrow and of course are immediately getting mounted, these will be the final touch

 

[Ericc B]

Hey Murph - That's a really good question and I don't have a definitive answer on this as we speak. If there's enough buzz surrounding them we'll likely have them made.

Being said here in the event that you just wanted to give a set to try to test fit there's no way I'm going to split hairs about a re-stocking fee (That's not how I operate here!)

Like I said - If you want to order a set just to see what you think, drop the car on the ground to get a look and it's not something that you're after I'm here to take care of you and make the return and refund as painless as possible...Just like going to the dentist :cheers:

Keep me in the loop and I'm here to help.

Alex

If you guys are looking into smaller sizes then may I suggest that 15 or 17 mm would be even better than 20mm. Especially on a non-lowered car it will look more natural, while still fixing the factory look. It will also work better with the lower ET factory wheels like the 19" 50th anniversary and the 20".

Besides that you would have a unique product, as Eibach is doing 20mm already.

 

[Naeem_S550]

Hey Naeem - Welcome to Mustang6G. That's a great question and I don't believe that you would have any issue what so ever having them installed as they're designed to work with both factory and aftermarket wheels. If you've read through this entire thread I'm sure you'll see on page (1) that I had a little miscommunication on my end and was totally wrong about fitment but you should be good to go!

Don't hesitate to let me know if you're to have any other questions and I'm here to help!

Alex

Thanks Alex for your help, I'm looking forward to buying these.

I'm all for 20mm as well, Make it happen

 

[AMAlexLazarus]

Look forward to these becoming avail again! My new AMR wheels from AM (thanks Alex!) arrive tomorrow and of course are immediately getting mounted, these will be the final touch

Rock and roll brother!

Thanks again for working with and the back and forth PM's - As much as I wish I could sit on the forums all day I monitor about 10+ along with having another host of duties. I try to get back to PM's as fast as possible but what can I say, I'm not a machine!

I'm looking forward to seeing them on your car very soon and rest assured once I know when we're getting the spacers back online you guys will be the first to know!

Alex

 

[AMAlexLazarus]

If you guys are looking into smaller sizes then may I suggest that 15 or 17 mm would be even better than 20mm. Especially on a non-lowered car it will look more natural, while still fixing the factory look. It will also work better with the lower ET factory wheels like the 19" 50th anniversary and the 20".

Besides that you would have a unique product, as Eibach is doing 20mm already.

Hey Eric - You raise a really good point here and I know exactly where you're coming from. Having been on everything from Cut-Springs, Springs, Coilovers and Air you nailed it. I'll make sure that this gets passed along to the right people to see if we're able to get moving on something like this. Let me know if you think of anything else and I'm here to help out.

Alex

 

[AMAlexLazarus]

Thanks Alex for your help, I'm looking forward to buying these.

I'm all for 20mm as well, Make it happen

Anytime sir! Don't hesitate to shoot me a PM if you're to have any questions and take a look at the New 2015 Parts Page, we're updating it daily and I think I just saw me some Turbo Kits drop this morning!

Alex

 

[Brice80]

Hey Eric - You raise a really good point here and I know exactly where you're coming from. Having been on everything from Cut-Springs, Springs, Coilovers and Air you nailed it. I'll make sure that this gets passed along to the right people to see if we're able to get moving on something like this. Let me know if you think of anything else and I'm here to help out.

Alex

Yea Alex I'd be very interested in this as well. the 25 looks great, but I'd be leaning more towards the 17 or 20 if y'all had them. Waiting until y'all get something like this, to do pro kit and these all installed at once.

 

[Branman]

 

[Brice80]

My god Branman, that's incredible. Are those the 1 inch? How do you like them so far, the car looks great!:coolphotos:

 

[Carlosa_garcia]

Very sexy looking. Love that stance. A little rake to it.

 

[murphy]

Yea Alex I'd be very interested in this as well. the 25 looks great, but I'd be leaning more towards the 17 or 20 if y'all had them. Waiting until y'all get something like this, to do pro kit and these all installed at once.

I'm quoting Brice. Put out some 20mm spacers and I'm buying those and springs that day. Make it happen, Alex! :cheers:

 

[Pootie_Stang]

Branman that looks sick! What springs do you have?

 

[Branman]

Thanks guys Im on BMR springs and they are the 1" spacers at all 4 corners. The stance just can't be captured in a picture. Its truly a menacing look in person. I drive the car pretty hard and have yet to get any rubbing. Those on the fence about 20 or 25, I wouldn't hesitate to go with the 1" spacers again.

Sponsored