0 to 60 of a stock GT coupe

[cyberbro]

I can't ever find anything when I do searches here but I do try.

Is the 0 to 60 of a stock GT coupe the same for Automatic and Manual?

Sponsored

 

[BULL1TT]

On the track apps with my stock auto with 3.55 gears it went 0-60 in 4.6 seconds.

 

[cyberbro]

On the track apps with my stock auto with 3.55 gears it went 0-60 in 4.6 seconds.

Ok Awesome. Thats what I was hoping to hear

 

[BULL1TT]

Ok Awesome. Thats what I was hoping to hear

My car was also equipped with the 18" foundry wheels, spare tire, full tank of gas and is a Base model.

 

[chadmclark]

Car and Driver did a test of the nearly base model auto; it mustered 4.5 ... they didn't list the upgrade to 3.55 from 3.15 but I've heard that the 3.15 are good for 4.5 because of the different gear ratios in the auto tranny itself.

Seems like the 3.55 and 3.73 give better 0-60 on sticks, but, I'm seeing the same 0-60 numbers there too - in fact, the only gains I saw online were the 2011-2014 models (e.g.: 3.31 stick 4.6 and 3.73 stick 4.3)

Sent from my SM-N920T using Tapatalk

 

[50hhh]

Best I have seen was a PP GT do 4.3 most average drivers will hit around 4.5 or 4.6

 

[chadmclark]

Best I have seen was a PP GT do 4.3 most average drivers will hit around 4.5 or 4.6

Yeah, prolly the bit of extra weight, up from the last S197. My 13 Boss was pegged at a best of 4.0 flat, but I tell ya, the butt dyno can't tell much difference between that and my auto 15!

Sent from my SM-N920T using Tapatalk

 

[brandonsmash]

To be honest, I'd think that the manual would show slightly slower times due to the extra time to shift.

 

[MultiMediaWill]

I don't know if I'm a bad driver but I can't exceed 5.2s in my 3.31 GT.

 

[evo8904]

I don't know if I'm a bad driver but I can't exceed 5.2s in my 3.31 GT.

Probably just having traction issues.

 

[chadmclark]

Probably just having traction issues.

Exactly! Even once I went to 295 in the rear I still spin em ;)

Sent from my SM-N920T using Tapatalk

 

[MultiMediaWill]

Probably just having traction issues.

Yeah exactly. Any fix to this? Or just warm up the tires well?

 

[Sub-Moa]

BMR and Steeda make parts that will help with your wheel hop. The BMR cradle bushing lockout kit is one of the most preferred parts to mitigate the wheel hop. Should help your 0-60 time.

 

[Foxracing19931]

I did 4.8 before suspension mods and the whipple wheel hop definitely played some part in that

 

[evo8904]

Yeah exactly. Any fix to this? Or just warm up the tires well?

BMR parts and MT 305 DRs. Street tires are just going to spin. I have a set of MT 305 DRs and MT 305 street comps. The MT street comps get no traction lol, but those are my DD tires now.

http://www.mickeythompsontires.com/strip.php?item=ETStreetRadialII

Sponsored