Sponsored

mustanggt

  1. GT PP2 Magride Coil Spring vs GT350 Magride Coil Spring, Are they the same?

    Hi all, Does anyone know if the GT PP2 Magride Coil Spring and the GT350 Magride Coil Spring are the same? I'm looking to install the OEM coil springs on my 2018 GT w/ Magride since my chassis often scratches with Ford Performance Lower Springs. I'm having trouble finding a used set off the...
  2. P0131 Code

    I have a 2017 mustang GT with lth, pmas intake, gen 3 intake manifold, 47lb injectors and tuned on e85. A few weeks ago i noticed my check engine light come on and my afr was stuck on 9.8 no matter what. I connected my scanner and saw code P0131 (O2 sensor circuit low voltage bank 1 sensor...
  3. Low oil pressure? 2017 GTPP

    I can’t tell if I’m just NOW noticing the oil pressure gauge and it’s always been like this, or if this is lower than normal? ~67K miles on my DD with just a catback Oil changed by dealership at 65K This photo was taken after a 25 minute drive home in traffic from work. (GT350 gauge cluster...
  4. Rear Shock Mount replacement

    I hit a pothole at 55mph and cracked my driver front and back rims and tires, upon my own inspection i had cracked the shock mount on the rear driver back. I recently replaced it with an aftermarket shock mount, but my car seems to be still leaning a bit. I dont have any knocking while driving...
  5. SuperSnake front bumper on a GT?

    I want to buy a supersnake front bumper for my GT. The only one I can find is on Aliexpress. Do you think it’s legit? https://m.aliexpress.us/item/3256803708743490.html?gatewayAdapt=glo2usa4itemAdapt Has anyone purchased this one? Does anyone know any online stores that sell it? Out of all the...
  6. Outside of North America Brand New 2015-2023 Performance Pack Rotors

    Hey guys, I bought a set of performance pack rotors for the 6 piston Brembo's that come on our cars. But I decided to do something different. So I have a set of brand new, never been used 2015-2023 GT Performance Pack rotor set. I'm here in Germany and would like to sell here preferably. But I...
  7. coolant change?

    So i have a 2015 mustang gt and i wanted to top off my orange coolant. I know ford changed to that “yellow” coolant and is backwards compatible with the current orange coolant. Does anyone know if I should just mix it with the yellow coolant or just do a complete flush and put the yellow...
  8. Cervini 4 Inch Cowl Hood - Mustang GT (2020)

    So I'm looking into a cervini 4 inch cowl hood (link to product posted below) for my 2020 Mustang GT. I was wondering with a hood like this, will i lose any performance due to drag, or will I gain something from it? Seems like a silly question but im still a noob to these types of hoods. Link...
  9. Drag Pack for 2020 5.0?

    So this may be a dumb question, but I keep seeing Mustang GTs with "drag packs." I was wondering if there's a place that I could get this added to my 2020 GT.
  10. Thoughts on Injen Evolution CAI (2020 Mustang GT Premium)

    Thoughts on the Injen Evolution cold air intake for a 2020 Mustang GT? How is it regarding any noticeable difference, gains, cooling, etc? Link to product posted for reference. https://www.americanmuscle.com/injen-mustang-evolution-cold-air-intake-evo9202.html
  11. 2020 Mustang GT Premium Spoiler Bolt Thread Size?

    So, I was wondering about the bolts that are used to mount the factory spoilers on the 2020 Mustang GT. I was wondering what the bolt size and the thread sizes are.
  12. Ticking noise

    I have a 2015 Mustang Gt with a ticking noise that seems to be coming from the bottom of the motor. I recently did an oil change and used motorcraft oil with filter. The car only has 5000 original miles on it. i attached a video. My oil pressure is fine, this only seems to be noticeable at...
  13. California 2018 Mustang GT Fuel Rail

    Came off my sold 2018 Mustang GT (Gen 3 Coyote) which was supercharged around 5k~ miles. Fuel Injectors only - $80 (SOLD) Fuel Rail only - $80 $140 for BOTH ($20 off) Local pick up only please. Located in the South Bay area of Los Angeles County. (Carson, CA) Thank you.
  14. California Sold: 2015-2022 Genuine Ford OEM Mustang GT 5.0 Engine Strut Tower Brace

    Came off my 2018 Mustang GT which has since been sold. It was removed because my the strut tower brace would not fit over my supercharger. Asking $125. Local pick up only please. Located in the South Bay area of Los Angeles County. (Carson, CA) Thank you.
  15. 2015 mustang GT 5.0 aftermarket subwoofer problem

    So I’ve got a 2015 Mustang GT 5.0 and I’ve just had 2 12” subs installed and an aftermarket amp. After install at lower bass levels it’s fine but when I turn the bass up it lets out a constant bass sound, the system was installed professionally so I don’t believe it’s due to the system, from...
  16. S550 Saleen Mustang - New Velgen Light Weight Series

    Ford Mustang S550 Saleen Velgen Wheels Classic5 V2 Gloss Gunmetal 20x10 Front /20x11 Rear
  17. Canada - BC WANTED: Rear Diffuser for 2015 base GT

    Looking for a diffuser for the base GT. Was interested in something like the Verus engineering one but open to anything that fits the base car. Located in Canada but open to shipping from wherever (Canada or US). Thanks!
  18. Velgen Light Weight Series - VF9 - S550 Mustang

    2021 Ford Mustang GT Velgen Light Weight Series VF9 Gloss Bronze 20x10 | 20x11
  19. Is Magneride worth it to get the best of both worlds for a track car/daily driver?

    Hi all, Relatively new to posting on the forum and relatively new to modifying Mustangs (been modifying mine for about two years now). I have a base 2015 GT that has been modified to be a weekend track/autocross car and also a daily driver. Relative mods to this post include front struts, rear...
  20. 2018 A10 Mustang GT vs 2012 GT500

    Ive been thinking about this for months now and I now have saved enough money to buy one. I have always wanted a 2011-12 GT500 but now that these 2018-20 GT 10 speed automatics came out Im starting to think twice. I wont be daily driving the car and I plan on just adding a couple bolt ons and...


Top