kgschrader
Well-Known Member
- Joined
- Feb 4, 2016
- Threads
- 4
- Messages
- 71
- Reaction score
- 72
- Location
- Magnolia, TX
- Website
- www.spacecitypanteras.com
- First Name
- Kirby
- Vehicle(s)
- 20 GT350R LR217, 2017 Raptor, 20 720S, 71 Pantera
- Thread starter
- #1
There is quite a bit of information floating around in various threads...
Thought I'd try to focus on retrofitting an OEM differential cooler from a Track Pack car to a Tech Pack car.
I have all the parts and I have installed everything. Adapters, hoses, cooler, pump, etc. etc. It's all there now.
I have enabled the axle temperature function on the display along with the transmission temperature.
As noted by others, there is no wiring/harness available to plug in the pump nor the sensor, so currently, it's all there, but useless.
Does anyone have access to the parts book/diagram to ascertain the following?
1) Is there a harness from a Track Pack that can plug into the existing main harness?
2) There seem to be several 'main harnesses' that go through the car depending on the options. Will the Tech Pack harness support the Track Pack diff cooler harness jumper/pigtail?
Based on what little I know, the diff cooler pump is a variable speed unit which is controlled by the PCM via PWM? (Pulse Width Modulation).
If the wiring addition supports it, I would guess that the sensor would show up without any changes once it is hooked into the wiring since I have the gauge 'enabled'. Might be wrong though....
Will the PCM automatically see the pump and control it?
I doubt it... I would guess the 'as built' programming would have to be modified to a Track Pack.
Any solid information would be appreciated.
If I find out anything more, I'll let y'all know.
Thanks,
Kirby
Thought I'd try to focus on retrofitting an OEM differential cooler from a Track Pack car to a Tech Pack car.
I have all the parts and I have installed everything. Adapters, hoses, cooler, pump, etc. etc. It's all there now.
I have enabled the axle temperature function on the display along with the transmission temperature.
As noted by others, there is no wiring/harness available to plug in the pump nor the sensor, so currently, it's all there, but useless.
Does anyone have access to the parts book/diagram to ascertain the following?
1) Is there a harness from a Track Pack that can plug into the existing main harness?
2) There seem to be several 'main harnesses' that go through the car depending on the options. Will the Tech Pack harness support the Track Pack diff cooler harness jumper/pigtail?
Based on what little I know, the diff cooler pump is a variable speed unit which is controlled by the PCM via PWM? (Pulse Width Modulation).
If the wiring addition supports it, I would guess that the sensor would show up without any changes once it is hooked into the wiring since I have the gauge 'enabled'. Might be wrong though....
Will the PCM automatically see the pump and control it?
I doubt it... I would guess the 'as built' programming would have to be modified to a Track Pack.
Any solid information would be appreciated.
If I find out anything more, I'll let y'all know.
Thanks,
Kirby
Sponsored