Holley Sniper intake has shipped!!!

I am in Hawaii and the UPS man comes around 7 p.m. local. You will see it in the morning. Lol

O.k. guys here it is. I am very impressed so far. Here are my observations.

Welds look good. A little slag on the inside but not bad and not affecting any flow at all.

Everything is included except for the line that runs from the fuel rail to the supply line. I should have all the parts for that and I will look tomorrow.

The rails come with 3/8 to 8 AN adapters. This makes thing a lot easier. Everything is black even on the inside.

Throttlebody. This thing is made for stock throttlebodies. However I have a GT-350 Throttlebody and there is plenty of flange to just drill and tap the larger holes into the manifold for an instant conversion to the GT-350. I will be sending my TB out to Maxbore to get a little more opened up. The GT-350 TB blade opens up with no interference into the opening.

Overall very happy with my purchase. It should go on with the stock TB over the July 4th weekend.





Everything from intake bolts, fuel rail bolts, gaskets, fuel rails, o-rings, crossover line, and what appears to be clamps for the coolant hoses.


GT-350 TB

And Oh BTW. StangTV never released the article and this thing is now in customer's hands. I might just install this weekend to make a point.

Looks great, thanks for the update!

z06psi said:

And Oh BTW. StangTV never released the article and this thing is now in customer's hands. I might just install this weekend to make a point.

Click to expand...

I know I would.

In fact, I probably would have taken today off just for the event.

in for after installation info..

z06psi said:

And Oh BTW. StangTV never released the article and this thing is now in customer's hands. I might just install this weekend to make a point.

Click to expand...

So ridiculous that they have not released it yet, what are they waiting for ?

ATTFighter said:

So ridiculous that they have not released it yet, what are they waiting for ?

Click to expand...

For me to install it I guess. :doh:

Can't wait too see results.

z06psi said:

And Oh BTW. StangTV never released the article and this thing is now in customer's hands. I might just install this weekend to make a point.

Click to expand...

Post results for them.
F stangtv.

So the fuel is easy.

Working from the quick disconnect against the firewall.

3/8" female quick disconnect to 6AN male.
6AN female hose fitting
6AN hose about 36"
6AN 180 degree swivel fitting to 6AN female hose fitting
6AN male to 3/8" male adapter for the fuel rail

Everything else is easy.

I have the intake solenoids already disconnected and deleted in the tune so you will need a tune.

The evap solenoid will have to be moved to underneath the intake and there is room.

The only thing I am waiting on is a tune revision from Lund as I had some soot with the original tune. As soon as that comes in next week I will be replacing the intake next weekend for sure.

In because of curiosity!
Hope it's everything you wanted out of it

Sub

In for results.

Obsol3te said:

In because of curiosity!
Hope it's everything you wanted out of it

Click to expand...

It has checked all the boxes so far. Price, fitment, and looks. Me being Forced Induction I don't see me losing H.p. and if I do I have another pulley here to put on.