Sponsored

Search results

  1. Gen 2 with gen 4 whipple burbling at WOT

    Hey I have a 2017 Mustang with a stage 2 2.9 whipple dw400 jmaxx bap on e85 running the 3.75 pulley and long tubes my car has started burbling or gurgling at wot I got it tuned and it was fine and about 2 weeks later it’s started… I can be 75-80% down on the pedal and it will accelerate fine but...
  2. Abs light- Traction light and steering fault light and sometimes check braking system

    Hey my car threw an abs light now it drives and brakes funny.. I took it up to AutoZone got pulled the codes tell me what you guys think?
  3. Sound coming from whipple

    Hey is this normal for a 2.9 stage 2 to sound like this? Or is something giving out?
  4. Whipple supercharger oil substitute (In stores)

    Any recommended successful oil that can sub out whipple supercharger oil or the ac delco that I can find in stores on hand… I’ll have to wait days for those oil..
  5. Best brand muffler needs to be quieter

    Hey I installed some long tubes they are 3 inches so I can’t run the stock 2.5 muffler I need this car stock quiet… so what’s the best brand or can someone send me a link to some 3 in aftermarket headers that are close to stock noise level…
  6. Dw400 + BAP

    How much hp can a dw400 with a bap handle looking to be around 850-900ish I have a 2.9 whipple with 2.8 pulley.. Currently on just the Dw400 and 3.7 pulley seems to be fine
  7. Need help badly crank shaft seized

    Hey I was doing oil pump gears and sprocket on my 2017 Mustang Gt… The timing belt must’ve been off time when I put it on. The crank will turn about 180 degrees now at first like only 90.. sound like it’s hitting metal when I turn clockwise same thing counterclockwise but it’s gradually give...
  8. Need help badly Crank shaft not spinning

    Hey I was doing oil pump gears and sprocket on my 2017 Mustang Gt… The timing belt must’ve been off time when I put it on. The crank will turn about 180 degrees now at first like only 90.. sound like it’s hitting metal when I turn clockwise same thing counterclockwise but it’s gradually give...
  9. 78lb 800cc fuel injectors for sale

    bought these to install on my whipple rail but they are to long I need medium ones.. I’ll take $350 or trade for some medium ones of same cc and lb
  10. 2017 mustang gt gen 3 2.9 whipple install

    Hey I bought a used whipple kit… It came incomplete.. I have a question about the wiring harness included with my kit… I have no blue plug to go in to the imrc under the intake manifold… Only positive, negative, fuse, and relay plug.. Can I use this harness for my intercooler pump or do I need...
  11. 2017 mustang gt whipple gen 3 install

    Hey I bought a used whipple kit… It came incomplete.. I have a question about the wiring harness included with my kit… I have no blue plug to go in to the imrc under the intake manifold… Only positive, negative, fuse, and relay plug.. Can I use this harness for my intercooler pump or do I need...
  12. 3.73 on base model 2015 gt non pp

    Hey can I have my tuner change my ratio to 3:7 without actually going into the rear and installing AM gears… I’m pretty sure you don’t have to buy them and the tuner can just change the ratio as long as the sytem Can take it correct? Or not correct
  13. Best headers for s550 running E85

    Hey I have a 2017 mustang gt I read in a forum that some o2 sensors go bad quick when running e85 from leakage… They need to sit an angle it said… I was wondering which headers are the best to avoid this… I was thinking of getting bbk titanium headers but I think those were one of the ones that...





Top