Search results

So I've seen some hype about forged wheels and other components (brakes, etc..) coming from Alibaba. I've never ordered anything from there as I have always been very skeptical. But I have been looking to do a drag pack for the rears, all the usual suspects VMS, WELD. Then I started looking...

So I was taking apart my door panel today for some speakers. My passenger window switch was very stuck. When I finally got it out the switch came apart. I ahve all the peices, but I have no idea where these white plastic pieces go. It seems that without these the button is completely slack...

I've been fighting knock/false knock issues with my setup since I installed it earlier in the summer. Recently I've had some significant reduction by readjusting my intake piping and actually putting all the fasteners into the under paneling. Also, I always had a slight BBQ tick, but when I...

So for the 2015 mustang I couldn't find a relocation bracket that I liked or that didn't require drilling into the bumper. So I decided to make one. The plate in the middle of the car is fine, but I feel like it looks better when its a little off center. Below is the car as it sits and an AI...

I might be going crazy but does anyone know what size socket to use for this ground wire bolt. I've tried them all and they either don't fit or slip when turning. I saw a video where they said 8mm but that one just slips.

So I've had my ESS kit on for a few months and have probably put about 300 miles on the car since. The car is a stock gen 2 with an ESS G2 120mm pulley, BAP, and gt500 injectors, NKG 6510 gapped to 0.026". Car has 45k miles. The car is also tuned by Wengerd. I have the AVID device so I am...

So the question is, to monitor oil pressure, is it better/easier/safer to run a sandwich plate versus teeing off the stock pressure sensor location (2015, 5.0)? I know there are some concerns with hanging sensors off the block and having them break. But what are the downsides of having a...

So I have been fiddling around with designing a 3 gauge mount that goes on the dash speaker area. My buddy back in the day had a STI with one like this and I always thought it looked great. This one is designed to fit 52mm Gauges, specifically AEM X series with the low gauge depth. I've seen...

I have a set of Steeda jacking rails (Coupe, Full Length) and a Steeda subframe alignment kit for sale. The alignment kit is unused and still in the original packaging. The jacking rails are slightly used, with the only signs of use being a little corrosion on the inside around a couple of the...

Moved to non-sponsor section

So I have a 2015 mustang GT that I just brought in for inspection. The garage tells/shows me that my reverse light isn't working. Also, my backup camera isn't working but its been on the outs for a while. They replace the bulb and that doesn't work. They send power to the bulb and it works...

I just received my ESS kit and the intercooler came as black (not sure if there was an option for anything else). However, I would prefer the natural aluminum color. Is there any downside to spray painting the intercooler over the black paint? I guess it may be slightly less efficient, but...

I have the following items for sale. All are unused with the exception of the BMR springs which have about 3k miles on them. I'm fine with shipping it all, but the buyer will need to pay the cost. I am located in Massachusetts, close to Boston. Everything was purchased for a 2015 GT non-PP...

I am selling the wheels and tires from my 2015 Mustang GT w/ Appearance Package. This setup was removed because I picked up some SP2 reps from a member on here. These have been in the shed ever since. There are a few light scuffs on the edge of the rim (probably from the tire shop) but zero...

I have a set of 4 barely used Yokahama Ice Guard IC52 winter tires (255/40 R19). These tires have been used for two (2) seasons and have maybe seen 2-3k miles of use total. These tires worked really well and got put the the test in a couple of storms with good results. The tires look to have...

Does anyone know what thread size the front four 18mm bolts are to install the sway bar? When removing them originally it was insanely hard to remove them. I figured it was the blue loctite causing the issue. But upon installation of the bolts they go in a few threads then get uncomfortably...

So I was installing my new BMR front sway bar today (2015 gt 5.0). Everything went pretty smooth until I tried to line up the holes for the saddle clamps. One side can line up but the other is very far off. I tried putting just 1 bolt in loosely and getting the others to line up but it's just...

So my car has 3.55 rear gearing. I'm contemplating going to a 3.73 gearset to give it some more pep. The car is a 5.0 6spd and not a daily driver, just something fun for the weekends. The rear tire is a 305/35r19 so slightly taller than the original 255/40r19 that came stock with it. Would...

Where is the best place to buy sensor plugs? I have a 2015 gt 5.0 and the a/c presure sensor wires got rubbed/chewed through. I need to splice in a new plug (can't find the old one ). I've looked online and can find the sensor with the plug, but just the plug i havent seen. Anyone have a...

I have a 2015 mustang GT (5.0, 36,XXX miles) which just starting having issues with the airbag light and going into limp mode. About a month ago the I was driving the car and the service wrench came on, car went into limp mode, and the airbag light came on (solid light, no blinking). I just...