Search results

Last year I installed the CB005 lockout along with the BMR TCA048 poly verticle links. This introduced a descent amount of NVH on the highway. I am looking at alternatives to see if I can reduce NVH. The CB762 by itself doesn't do a hard lockout of the cradle. It just adds bracing. My...

Looks like I need to replace my differential bushings due to one being cracked. I'd like to upgrade, but also retain the lowest added noise. Other boltons I have seem to have increased highway noise a bit. Kelltrac Rubber seems to be top on the list. I also found WhiteLine bushings...

Picked up a paxton kit and need the intake tube which connects to the stock airbox. Would also need a MAF cover for the stock airbox if you had that as well.

I bought a flywheel locking tool, however, it didn't work for me. Kept slipping off no matter what I did. In a search for other options I found this pic which worked for me. I didn't get a pic of my actual usage for it on the Mustang, but this did the trick! Figured I'd share for anyone else...

I've been running with the steeda clutch assist spring for a while. Loved the feel with it. Last week I installed an EXEDY clutch and noted how it felt stiffer. So I decided to put the OEM assist spring back in the clutch pedal. I seem to like it with this new clutch. Any one else do this?

Looking to replace my rack and pinion due to the clunking I get over low speed bumps. When I search there are so many part numbers that pop up. Which one should I pick and what exactly are the differences between them? Is it just a programming difference or are there physically different...

I've searched quite a bit. I can only find a company called AMP and another called Allstate Gears. AMP seems to be the only one that shows an upgrade on their parts being stronger than stock. A couple other places sell gears, but they appear to be a reseller for AMP. Does anyone know of...

I don't think this thing is all that bad. Once I put the MGW shifter, braided stainless clutchline, and Steeda assist spring, this thing shifts pretty good. My 1-2 and 2-1 shifts at slow speeds can be little pinbally, but everything else is pretty smooth going in and out of gear. One of...

Cradle Lockout + Poly vertical Links + Perf Toe Link Bearing = More NVH I recently did these three upgrades simply because it was something I could do for fun. Each of these states there is minimal to no increase in NVH. However, after doing all three, they have created a very noticable...

I've searched and cannot find any data regarding the CFM of the stock cats. What makes me curious whether high flow cats really do something is due to the size. The stock cats are much larger than any aftermarket. So even though they have a higher density, the larger diameter could offset any...

I used gimp to splice a 68 mustang bumper onto the S550. What do you think? Seems like the lines still work well with the rest of the car. I could see myself rocking this. I'm generally not a fan of the bumper swaps.

Post your "Roast My Car" shots here.

The joke I told my wife was that I was pretending to be a teenager again and wanted to install a subwoofer in the trunk. I wanted to make it look seamless in the trunk and not take up much space. I ended up spending way too much time constructing it, but I'm happy with out it turned out.

I've searched quite a bit and can only find this Metra connector that goes directly into the back of the head unit in the dash. Does anyone know if a T-Type connector exists that plugs into the rear speakers so that the line out signals can route to an Amp? Here's the one that goes into the...

The traditional forum is such a better place for information than what humans have evolved to with social media. <grumpymanrant>I follow a FB mustang group and the EXACT same questions get asked every single day. I'm ranting a bit. haha. No one on social media knows how to use the search...

So I installed headers last weekend. Now my car with the Corsa Extreme exhaust is too loud... Looking to trade just the mufflers.

I couldn't find a ton of info about how people plugged the hole. I did find that people suggested tugging at the tube to pull it out since the nut holding it on was impossible to reach. They were right. It will evenutally come off. I couldn't get my hand behind the engine to get the plug...

Maybe someone can help. I put new wheels, tires, and sensors on a month ago. Everything seemed fine and they synced up. A few days ago I got this message on the dash when starting the car. None of the tire pressures were showing up on the dash either. So I bought the relearn tool. I am...

I can't seem to find any info on this except for guys with the ecoboosts. Does a 15-17 need one of those intake cleaning services?

So I recently bought some used PP Brembos off of ebay to upgrade my non pp GT. They came in and I spent a good number of hours cleaning them up, sanding them, and refinishing them red with a new white decal. They ended up looking pretty descent. Upon installing them I used some nice Motul...