Search results

I have a 2016 GT, was recently dealing with my battery dying after sitting for longer than a day, has anyone had issues with the BMS and the current sensors? I jump started the car and disconnected the negative current sensor and my dash voltage is reading 14.2 V while my tuner reads 14.5-14.7 V

I have a 2016 Mustang GT, car has 132k miles on it. Recently been having an issue where if the car sits for longer than a day, the battery dies. Recently replaced battery and car sat for 2 days, and had no power, what could the issue be? Only thing aftermarket wired up is my amp/sub setup, and...

I have a 2016 GT with a Mach 1 front bumper from 777 Performance, I was wondering has anyone had a issue with the lower grille unclipping at high speeds, and what could I do to help hold the grille in place as a retainer?

I recently installed a MGW shifter on my 2016 GT, I bought it used and it came with the upper rubber piece that isn’t circled, but didn’t have the lower piece that’s circled in the picture. Would I have to reuse that piece from my stock shifter, or does MGW send that with the shifter if ordered new?

I’m selling these wheels I had on my 2016 Mustang due to buying new wheels. Wheels are Steeda Spyders, fits 05-14 Mustangs, but was modified to fit 15-23 Mustangs. They are a little dirty from just being taken off my car, plus might have some plastidip spots left from a buddy I got them from...

I know this has probably been brought up a bunch of times, but I have a 2016 GT with the 9 speaker system and was wanted to add a sub in the trunk to use with the stock sound system, what all would I need to get it to work? Also has anyone replaced the stock door and rear speakers with the...

Recently I had installed some catless long tube headers from 2M Fabrication, and with my current setup it sounds amazing, it’s decently quiet cruising but when it’s opened up, it SCREAMS

I have a 2016 GT with factory manifolds, h pipe and Mach 1 mufflers. I have a set of longtube headers and I was wondering how would they sound with my current setup. Anyone with a Mach 1 or GT w/Mach 1 mufflers have a h pipe and longtubes installed? Any sound clips?

I have a 2016 Mustang GT, and recently about a week and a half ago, when I would press on the brakes to slow down, it would make a metal grinding noise, and turns out one of the bolts holding the rear caliper backed out, and one didn’t take much force to break loose, which I fixed that, but at...

I have a 2016 GT currently with Mach 1 mufflers and a h pipe with the factory manifolds, are there any Mach 1 owners or GT owners with headers and a Corsa/2mFabrication double x pipe or just any brand x pipe? How does it sound?

I have a 2016 Mustang GT, and for the past couple months every time I turn the defroster on, or the ac on, there’s a noticeable hissing noise from what seems to be behind the dash, and I’ve been trying to figure out what it is. Could it be the evaporator core, or something else to cause that...

I have some Mach 1 mufflers I had bought to install on my car, but decided not to after hearing different aftermarket setups, the valves have been welded open by the previous owner, possibly wanting to trade for a set of 18+ Borla S-Type axlebacks, I have a 2016 GT

I have a set of Mach 1 mufflers I was planning to put on my 2016 GT, but ended up deciding not to, the previous owner had the valves welded open Would possibly trade for a set of 18+ Borla S-Type axlebacks 350 obo, prefer local pickup

I have some Mach 1 mufflers I might possibly end up selling, I had planned to install them on my car but can’t really find the time to install them, how much do they usually go for?

I have a buddy with a 2016 Mustang GT, and he had found a used ESS Gen3 G2 kit that he was planning on buying. Would it fit on a Gen2, and are there any differences between the Gen2 and Gen3 kit?

I have a 2016 Mustang GT, and I’ve recently been having some AC issues. It first started months ago when I discovered there was a hole in my condenser (which I did replace), and that fixed the problem for now, until about 3 weeks ago, where my AC wouldn’t work and was blowing out warm air. I...

I picked up a set of Mach 1 mufflers a couple months ago to put on my 2016 GT and I was wondering has anyone installed a set on theirs, and how does it look (I already have a quad tip valance from when I installed a stock active exhaust, and then the nonactive after losing the other one)

This is probably a long shot but imma try anyway. I have a door that was taken off my 2016 Mustang GT and was replaced by a new door, the color is Shadow Black. Comes with the door harness from a base model car, and the door speaker. The damage is just the dent and some yellow paint, door...

So a couple months ago I had to replace my passenger side door, it had been dented accidentally scraping against a pole, and I replaced it with a used one also in Shadow Black. Any recommendations for where I could possibly take the old door to to get rid of it? I still have the harness from the...

I have a 2016 Mustang GT Premium w/Performance Pack, and I think my car has the infamous evaporator core leak, my ac went out Wednesday and it’s blowing warm air on the drivers side and colder air on the passenger side. I was wondering what is the steps to remove the dash and replace the...