Sponsored

Search results

  1. Front K-member Spacers?

    Does anyone know what Front K-member spacers consist of and who sells them? ..Or if it's possible to fab them myself? A certain Kenne Bell retailer I won't mention the name of, just put a 3.6L under the stock hood and they said they did it with the KB drop mounts and Sub-frame spacers. I...
  2. Steeda NonAdj RCA, Correct Camber?

    I'm reading over the description for the Steeda Non-adjustable Rear Control Arm (555 4127) and it says it "Helps correct camber on lowered vehicles", how exactly does it do that? Are the measurements of the Camber arms different than factory building in a better camber by default? If so, by...
  3. DW95's or ID1050x's for Stock w/E85

    Can you use either of those injectors if you have a stock 15-17 Coyote with only a CAI? (JLT tune req.) I ask because someone suggested buying injectors ahead of buying a blower and just using them on the E-85 NA setup until the Supercharger is bought. They seem awfully big injectors for a...
  4. DO I need lateral link & Bumpsteer Correction Kit

    Do you really need the fancy Tension & Lateral links and Bumpsteer kit if the car is lowered only an inch? (1.1" with Adjustables) Tension & Lateral links with Increased ball stud height & the Fancy Tie Rod ends?
  5. What's so wrong w/ Kenne Bell?

    Every time I've asked about choosing my next Blower or read someone else's question on it, 99% of the replies are "Get a whipple" or "Kenne Bells are junk". Is it because Youtube personalities are Tuning, selling and commenting or are there real problems with KB's? ..Even Procharger gets the...
  6. Clutch suggestions..'16GTPP

    So I'm building a Master of None car. *A Daily Driver that's borderline too much but does weekend warrior stuff. I understand it'll never be competitive because I won't stop it from being a DD. I need a clutch but most recommendations I see are usually for Drag racing. For good pedal...
  7. N/A vs P/A Coyote Power

    EDIT: How much Hp & Tq are full bolt on N/A cars making on Pump & E85? e.g. Builds with.. Heads Cams Intakes Bumps in Compression but still with Pump gas Long tubes and any other bolt on that's not a Turbo, Blower or Nitrous
  8. Chosing a clutch for Double Duty.

    Exedy Hyper Single or the RST Double are the two that seem the most popular across the forums but I have no track time with either clutch. I do a fair bit of driving with my '16GT, all the events are pretty far away and it's "one of" my DD's. I don't mind a noisy clutch as long as it does what...
  9. Color Code of Wheels for touch up?

    ..
  10. Driveline Thunk before takeoff.. GONE after install

    '16 PP GT Since I bought my '16 GT I have had a Driveline thunk from the rear of the car. Every time I'd stop at a Red light and realign the gears to take off again, I'd hear and feel a "THUNK". (Almost like what we heard back in the old days with the Dog Leg lose under the SN95's.) Since...
  11. ..even a little?

    No
  12. Steeda Progressives & Adjustable S/S

    I have a '16 GT Performance Pack that I'm slowly building for DD & Autocross. I have a few of the basic inconsequential things done but nothing to make real power. I'm back to learning to drive on the track and learning to control the power the car has with basic bolt ons & tune. I've been on...
  13. Does

    Does
  14. Black top??

    .
  15. 20x9.5 w/ +45 285/30 or 285/35 up front?

    ..
  16. Eastern Virginia Richmond-to-Tidewater

    What Mustang clubs & groups do you guys belong to?
  17. Exhaust Clip Roush X w/ Pypes Protouring M.

    When I bought the car with 5k miles





Top