Search results

I read the advertised frequency response as 85-5kHz. Guessing that the 85 is the -3dB point. It doesn't go to low, I would be concerned about balancing it with the sub.

Surprised to hear of the rasp with the H-pipe. That is my set up with zero rasp or drone. I wonder if where the crossover is located makes a difference. I have seen some with it located more front or rear. I got the MRT from CJP and it is located about as forward as it gets. Also curious how...

Nice install! Did you mount tweets in the rear as well or just the front? Do the C5-650s play well with the 75wpc? I have the same amp and am considering a speaker upgrade over my C2s.

I am interested as well. My thought is maybe one of the wood two pieced units could be modified with a hinge.

Spart, agree with what you are saying but then you run without any bass to speak of. So either a sub in the trunk or something in the rear deck would fix that issue.

OEM's module was supposed to convert the speaker level down to line level as well as remove the factory EQ. It did neither for me but I am sure it has helped others. My amp has a switch for setting it up either speaker or line level. On the initial install I went speaker level until his...

Just another note, I did try OEM's module to go to speaker level and remove all of the programming. For some unknown reason my car did not accept the download and I switched my amp to the line level config without taking voltage measurements first. This big dummy fried the amp!

No can do GTP as I have the base 6 speaker set up. Currently with the open holes in the rear as I hoped to achieve a little more bass into the cabin. That is when I was running to JL 8" subs in a sealed box in the trunk. I am actually fairly satisfied with the low end now the front is still just...

GTP, What brand/model are your new rears? Are they direct to the factory system with no other mods? Results on a scale of 1 -10 vs. stock? I do have an amp in the trunk pushing a 10" in my spare tire well with fair results. I have also replace the front stage also amped and I am just not...

So sorry for going somewhat off track here but it does concern the EQ. My question is concerning the base 6 speaker system but I am also interested in the upgraded systems. Has any one actually done any measurements on our systems to see what the roll off is as different frequencies or...

I did the wrap after emblem removal. It was acceptable at first but my hole filler shrank and the holes became very noticeable. Bummed. I just bite the bullet on the MMD painted black, much better.

Just a little thinking out loud and looking for some feed back. Back in the late 70's and 80's it was difficult to set up any front stage in my cars. mostly Camaros at that point. I would ride with a set of quality 6x9's in the rear deck driven by a decent amp. I just recall those systems being...

Symone, pretty quick for some simple mods!

wjfasbo, after your speaker install you may want to disconnect the A=pillar tweeters and see how she sounds. I did a coax in my front doors and was pleasantly surprised at how well it imaged without the tweets. I expected the imaging to be lower in the cabin but that was not the case.

It's been a looong time since I thought my car would influence a woman. Now maybe a Ferrari?

Yes, I should have read closer! I personally am not the biggest fan of an integrated amp but I am sure it is a great product!

Just did a quick read of your post again. I Had the single version, the double looks very interesting and a 2 ohm your amp should have more output. Looking forward to your feedback on this one.

I had one for a while. My amp ran 180wpc at 4 ohms. Output was good in a coupe for interior listening. It sounded much better through a 24 dB crossover vs. a 12 dB setup. I had it mounted in my spare tire well. You won't wake the neighbors but it is a major upgrade on the base 6 speaker system...

I have the same base set up and went through similar steps. I too purchased the harness and programmer from OEM. The harness makes it very easy. I would tell you to test the voltage on the audio outs as for some reason my radio did not accept the programming. I fried an amp as I did not test and...

Stang1971, I am interested in where you were able to get the graphics for your deck lid. Can you provide that information please?