Search results

H pipe and magnaflow cat back.

installed a custom dent in my passenger side door....... Knocked something off the table and it got my door. No paint damage so im going to call a PDR guy to come look at it

Got my idler pulley from whipple today. To my suprise they didnt send my a idler pulley. They sent me 2 of them! Super happy, i have spares now.

The resonators are used along with a the mufflers. I went from a 2.5" h pipe to the 3" i added the resonators too as well as got the 3" connections to eliminate that 2.25" choke point for the cat back. As a whole adding them should tone down the exhaust when added to a system. But with me...

Glass pack style resonators. 3" throughout vs the 2.25" of the stock one.

The snap ring on the whipple pulley was about 1/16 inch away from the bearing race so the bearing could walk in and out if it overcame the press fit. In my case it did and the pulley gad both axial play and radial play. With the pulley removed and in hand i could shake it and you heard the...

That would be awesome. I might go to 10mm of spacing as i still rub on the inside of my fender liners however i think thats the tires fault asThey are a bit tall. however i have new ones on order at the moment.

Im running some thin 5mm wheel spacers in the front i wonder if anyone knows of extended wheel studs other than the 3" variety. I dont want open lug nuts or long lug nuts. Trying to keep it clean and low profile. I would love 5-10mm longer studs. I suppose i could cut them down and chamfer the...

I agree. Smoke test and the boot could have ripped, not popped off. A small rip might be hard to find with the naked eye.

Its been a long time since i did any car audio upgrages. But i loved JL Audio back then. Looks likeba clean install. Is the sound deadening throughout or just the trunk and doors?

Installed the pulley i made on my lathe to replace the bad whipple one. My naughty noise is gone.

Kooks lth, catless, h pipe with 18" long bottle resonators and factory active axle backs.

Worse. They are sitting in my garage, lol.

Walking around the car today after a repair i was listening to the exhaust and it has me wondering if i really want to do the axlebacks. It sounds good to me as is. Catless cooks 3" to the stock active axlebacks. H pipe with 18" bottle resonators

We all have negitives to say on venders so its nice to have good things to say as well. My idler pulley on my whipple went out and i made a support ticket to get a replacement. I made one on my lathe figuring i would have to pay full price ($120) plus shipping with it being out of warranty but...

Made a idler pulley on my lathe to replace the bad whipple one. Whipple wants $120 plus ship. I made one on the lathe for $20 and a hour of my time.

Thats a nice dashboard for a truck......

It was part of my kit from steeda. I did get the sway bar and adjustable end link combo but i would assume they should have come with the bar so you can actually use the other two holes.

Figured out a new noise, lol. Whipple idIer pulley went tits up.

They include two flat brackets to replace those.