Search results

Dynotech https://www.cjponyparts.com/dynotech-driveshaft-aluminum-one-piece-3-1-2-manual-transmission-gt-2015-2018/p/DS43/

I am selling my 600/6 as I no longer need it after upgrading to the Helix P-Six. It has about 8 months of use,but I only drive the car once a week. Original box,package and instructions included. https://www.sonicelectronix.com/item_81598_JL-Audio-XD600-6v2.html They are about $550 online...

I started out keeping it 3-way,so I couldn't really answer that one.The focals have a fantastic sounding midrange driver on their 3-way setup,but the tweeters can get overbearing sometimes with some types of music.I settled for the Hertz mille pro based on the sound/price point.The tweeters...

I upgraded to a Helix Psix,so I have a used (maybe 6 months) JL audio xd600/6v2 up for grabs.I would take $300 for it if you are interested.PM me

2 rca cables or 4 ? Are you using the rear channels? Pin 8 is left front + / Pin 6 is left rear + Pin 7 is left front - / Pin 5 is left rear - Pin 4 is right front + / Pin 2 is right rear + Pin 3 is right front - / Pin 1 is right rear - Do not use the chassis ground for the rca connections.

Yes. http://www.mustang6g.com/forums/showthread.php?t=58862

It has become an expensive hobby,hence all of my equipment is approaching the 20 year old mark. Here it goes.This is the 2 channel setup. A Theta transport sends the digital signal from the cd-rom to a Genesis digital lens,then back to a Theta DAC.From there it goes analog to a Aragon preamp...

You did not connect the canbus lines to anything,did you?

what part number do the terminals in the second row have, i.e. the terminals that match the blades?1326030-3 is 14/16 gauge.1326030-4 is 10/12 gauge. I never used them as I pc board mounted my plugs.

It is the same pin size.The connector is designed to be pc board mounted,so all they do is double up the pins together to make the wide blade handle more current.

Dazza,did you try to pull 1 rca out at a time?Or maybe 2 leads are touching each other. My system is dead quiet.If I crank the volume all the way up,I can barely hear the motor noise from my intercooler pump.Roush uses the radio suppression circuit as a turn-on for the pump relay.It has some...

Sorry to break the news to you,but there is no hiss.You might have a bad ground on one of your rca plugs.Or something is bad on your amp.:shrug:

http://www.mustang6g.com/forums/showthread.php?t=77679

There is a thread on here somewhere as to what string has to be modded in the file to load into the acm.There are also threads on the ford fusion forum as to how it is done.I had OEMradio write me the file years ago,and my buddy that works for ford used his ford scanner to load it.Some say the...

I did do the change to the As built data for a flatter signal.That change was small,but an improvement.Now I run a Helix amp that has both input and output EQ,crossovers,and time alignment adjustments. To me it is the easiest and best solution as it is all in one unit. You could also use just...

Pin #1 is 6 volt turn-on Pin #11 is Ground Pin #14 is 12volt fused. Wire the PAC TR-4 input to the pin #1,and you now have a 12 volt out. Doing it this way the system retains all of the factory switching.

You mean like this? http://www.mustang6g.com/forums/showthread.php?t=58862 Or this http://www.mustang6g.com/forums/showthread.php?t=81102

.0025 on the main,.003 on the rod.The main will expand slightly due to the aluminum block when it reaches temperature.It will need 5w-50 with those clearances.

Calling all long islanders......... The mustang/shelby car show is at Lucas Ford this sunday. https://www.mscli.com/events/upcoming/lucas-show-flyer/ I cleaned the car today to cruise out there.If anyone wants to meet up on the LIE,let me know. On a side note...Gnfanatic,I am also from...

That crankshaft was fractured from the installation bolt.It looks like the shank part of the bolt fractured the crankshaft right where the threads start.The install bolt is only used to start the balancer maybe half way on,then you can use the stock bolt to pull it all the way home.This snout...