Search results

It seems that the stock version has pre-drilled holes already with screws already installed to cover the holes up, the instruction manual says to remove those screws that wont be used again, if you decide to install the wickerbill, it even says a warning for track use only if wicker is to be...

Here is an example https://bigwormgraphix.com/2018-21-mustang-mach-style-hood-stripe/?setCurrencyId=1&gclid=CjwKCAjw6fCCBhBNEiwAem5SOyKvP9UpdART1Xm1MLrxPTEzFtjif7sX6OT6-VzsZfKiPwevZBeF9xoCAoUQAvD_BwE

I have Shelby Venom Wheels which actually are Forgestar made wheels and the Shelby caps are a hybrid metal version of the Forgestar O-ring cap. I bought spare sets of the black and chrome versions of the plastic Forgestar caps. Other Forums have had people just stick resin domed stickers...

Had that happen too, but luckily on a painted wheel, the Dealership had a wheel guy come out to fix it for free. I have often tried to avoid machined rims, since everytime I got a machined rim scratched up, the wheel guys warn me that they will use paint and clear coat to simulate the rest...

I was curious about if my CAI is sealing on my hood, I did see the lines of the intake. it seems that the heat extractor inlet is just short of the entire CAI. so it is not even over the CAI section, I think that helps focus all the heat in the engine and around the CAI housing to escape...

You can now get the mach 1 style hood decal aftermarket in any color with no color in between, just whatever your body color is will show up between the lines instead of red/orange/white etc. But would need to add a Mach 1 logo on it.

Hence the lower price, maybe they still make the bumper but moved it to just higher trims only, still cannot buy the GT-H hood or the bumper, but ironically cans till buy the upper grill insert and the super snake hoods retail. but still the top end versions also retain the Pony airbag...

I am not sure I am getting the lose control feeling with this tune as some say, maybe cause I have not done WOT at all from a stop with this tune :P Maybe it helps that I have an IRS lock out kit, but I can feel the extra power available. So far the A10 shifts are smoother both up and down...

All set and installed, they did a nice clean cut on my cover and also I removed the plastic screws on the wire retainers so they could properly lock on the CAI screws. I also had some sheets of adhesive black felt laying around so I just cut a few pieces to cover up the slightly open areas...

I saw same 771 before and after, but I do realize that is close to Pirelli Zero Nero All Seasons 255/40/19 (they list 770 RPM) Should I bother to change to 769 for BF Goodrich Comp 2 a/s in same size which states 769. or just leave it as is. I guess I could play around with a GPS app to...

The installer did adjust my driver side one a bit, after install, the hood could shut fine but we could tell the edge over the light was not lining up with fender and front bumper edge, he just twisted it a bit then it lined up.

Is there any negative to placing a vinyl decal of a text on top of a vinyl strip, or the matte black vinyl pattern layer on top of the gloss black vinyl layer? Will that even hold up?

A place called autodesign has them and also some sellers on ebay. https://autodesign.shop/collections/decals-stripes-stickers-for-ford-mustang I was thinking maybe I could try this on my car and I modded the stripe a bit, maybe just cut the lower fender portion off so its a straight stripe...

Looks like some places now sell replica Mach 1 stripes, looks like its a two stage decal you have to apply. and the Mach 1 letters are a separate vinyl so you can skip them. seems so far I have only found orange or silver as the side stripe options for both hood and side, Silver would...

So I should double check only after they dealer flashes the car, or go check it out while on stock? I am curious cause tire calcs say very different numbers and the older procal 3 manual for Ford has a calculation formula that does not even match the generic calculators, yet my specific...

Do I need to do any of this or does my stock file uploaded to FP which then gave me the performance tune file already compensate for my existing factory set up, does it already know I have 3:15 gears and stock 19" wheels, or I need to go double check in the procal4 after flashing the...

FP Tech on line did not have an answer for the Flags = 2000 and just said it is ready to be programmed to the car? Also mentioned for those who want to keep warranty to send invoice to [email protected]

also PP1 lower k brace

I enjoy my GT/CS I did make a few changes to mine, I replaced the front with the Steeda Q bumper and that enabled me to still retain the original upper and lower GT/CS grill along with ACC still working fine. I did change out the wheels since I prefer gunmetal anthracite in general and...

So the procal portion was to go to FP site and create your account and then enter voucher under procal, it then prompted to download the file. I then installed procal software then updated it then updated the device once connected. I then went to my car and had the procal download my stock tune...