GT500/Raptor R/GTD Throttle Body Gears

[Epiphany]

I purchased a takeoff Raptor supercharger and sent it to Kong for porting. The blower came with its respective throttle body but the electrical connector was smashed during shipping. The mechanicals are fine but you can't buy the electronics separately from Ford. So I had no issue popping the clips for a look inside. I must say, its pretty robust in there.

Sponsored

 

[5doorsoffury]

yikes and obv you want a new unit but thoes conductors look ok as well as the connectors body so it would keep the connector attached when plugged in i assume? is jb weld/ plastic welder out of the question.

if it were me id glue that shit and eventually replace it when i find a good price but one mans pride at a repair is another mans reason to not poop his hood due to a hidious glob of glue on the tb

 

[Epiphany]

The fragile metal pins that start at the connector preclude me considering trying to butter up the plastic housing. The main pair of connectors you see inside are indeed fine. I'm just gonna keep it for the mechanicals, should I ever need anything.

 

[OX1]

Can get those cheap, not even worth fixing, if one really wanted a stock replacement.

https://www.facebook.com/marketplac...h&referral_code=null&referral_story_type=post

Sponsored