Top Down - Rubber stop missing on one side

[ssteph1984]

When the top is down it is sitting crooked. Driver's side rubber stop it rests on is missing. I have already been to the Ford dealer and they can't find it in their drawings. I tried to find it myself on parts.ford.com. I have an Oxford White 2015 Mustang GT Convertible. Could someone please help me locate a replacement rubber stop. Thanks

Sponsored

 

[Johnnybee]

Perhaps it is part of an assembly and not shown as a separate piece. Although you would think they would know that.

 

[DANA44]

Mine has one MIA also, thinking they be of quality that they shear off over time. I may just fab up something like using a faucet rubber seat or similar material for a footing.

 

[CVCashmere]

Send pix please.

Mine also sits a little crooked.

thanks

CVCashmere

 

[Tim_]

Pictures required, there’s a lot of rubber in the roof!

 

[ssteph1984]

Pictures required, there’s a lot of rubber in the roof!

 

[CVCashmere]

Thanks for the pix.

I have both items. I wonder if they are adjustable so that I can lower the one side.

CVCashmere

 

[Fordever]

If this missing part isn’t causing any rubbing damage, then remove the other one. If the missing piece is what you think is causing your unlevel roof, then in theory, removing the other would fix it.

I know it not the ultimate fix, but........

 

[Smokey613]

I just checked and the one on the driver’s side is missing from mine too.

 

[ssteph1984]

I just checked and the one on the driver’s side is missing from mine too.

Crisis averted. Found the missing stop under the back seat. Found a puddle of water under the seat on the driver's side. Suggest everyone with a S550 vertible remove the rear seat and check for water.

 

[Johnnybee]

Is the seat bottom removal the traditional push in/pull up variety?

Add: never mind, found a YouTube video showing how easy it is. Also found no water (or evidence of any, having driven in a downpour today), but both cable grommets which go through the large oval grommets over the fuel pumps were not seated correctly nor were the large oval ones which I suppose means the bottom of the car has not been fully sealed from the outside world for the past year. Quality certainly is Job 1!

 

[Tim_]

Is the seat bottom removal the traditional push in/pull up variety?

Add: never mind, found a YouTube video showing how easy it is. Also found no water (or evidence of any, having driven in a downpour today), but both cable grommets which go through the large oval grommets over the fuel pumps were not seated correctly nor were the large oval ones which I suppose means the bottom of the car has not been fully sealed from the outside world for the past year. Quality certainly is Job 1!

Have you got a link to that?

 

[Johnnybee]

Have you got a link to that?

 

[kellerb5951]

Anyone ever identify this part number? I'm missing the drivers side as well. Thanks!

 

[kellerb5951]

Found the part if anyone is interested.

Sponsored