Aggressive Fitment Thread

[Roh92cp]

The ruler pic looks like those are between 12.25”-12.5” in overall width?

Thats correct.

Sponsored

 

[Ohthatguy]

Thats correct.

It’s crazy how different the ‘real world’ widths can be between brands. MPSS 325/30/19s are 13 3/8ths unmounted and around 13” mounted on an 11” wheel.

 

[Roh92cp]

It’s crazy how different the ‘real world’ widths can be between brands. MPSS 325/30/19s are 13 3/8ths unmounted and around 13” mounted on an 11” wheel.

Agreed, it blows my mind that same size tires can very so much. I could understand .25 difference, but we are talking about 1.25" difference at times with the same size.

 

[DeepakGTCS]

Need a 305 in the back 20x10.5 squared

 

[Roh92cp]

I’m getting aggressive soon. Rear wheels widened to 12” by weldcraft. They did an outstanding job.

 

[Ohthatguy]

I’m getting aggressive soon. Rear wheels widened to 12” by weldcraft. They did an outstanding job.

Any update? Did they clear? If so, how much room to spare?

 

[Roh92cp]

Any update? Did they clear? If so, how much room to spare?

The 315/30 IN G2’s is a new tire size and Discount Tire didn’t have them on hand, had to request them from NITTO first. They are shipping to me today so I hope to have them mounted by next week some time. I’m dying myself, can’t wait to see the figment. I’ll post up lots of pics when it’s done.

 

[Ohthatguy]

The 315/30 IN G2’s is a new tire size and Discount Tire didn’t have them on hand, had to request them from NITTO first. They are shipping to me today so I hope to have them mounted by next week some time. I’m dying myself, can’t wait to see the figment. I’ll post up lots of pics when it’s done.

I know the wait is killing you. Did you have the steeda shock mounts installed to get that extra .25” of clearance? That’s my next move.

 

[Roh92cp]

I know the wait is killing you. Did you have the steeda shock mounts installed to get that extra .25” of clearance? That’s my next move.

I got them last week, and they will be installing them tomorrow.

 

[Jaehead]

about to join the aggressive fitment club.. 19x10 et15, mocking up fitment for 11inch square setup

DSC_0006 by Jae Choi, on Flickr

 

[Primetime S550 GT]

Should I put the Project 6gr center stickers on?
Wheels: 19x11, 19x10
Tires: 305x30x19, 275x30x19

 

[16_DIB]

Project 6GR FIVE

Front: 19x10 +35 with 285/40/19 Kumho Ps91 .... i used my old tires i had on my stock rears. ideally i would be on a 35 sidewall.
Rear: 19x11 +50 with 305/35/19 MPSS
Lowered on CJPP Springs

 

[Braski]

Ok, so my set up is not super aggressive but I'm hoping my post can allow someone to go more aggressive than I did because I played it a little safe just to make sure everything fit with no spacers. I did have to remove my front dust caps to get my center caps to fit. My set up is a sqaure set-up, Rovos Pretoria 20x10 et 38 and Indy 500 275/35-20 with no spacers. My rear camber is only at about -1.3 and I'm petty much flush. I think I could easily fit 285/30 or even a 285/35 under my car with no issues other than taking the rear neg camber to -1.5 to -1.8. There seems to be plenty of room up front. I put on about 25 rigorous miles with absolutely no rubbing. I am on bmr sp080's.

 

[z06psi]

New wheels

 

[19S550PP2]

Ok, so my set up is not super aggressive but I'm hoping my post can allow someone to go more aggressive than I did because I played it a little safe just to make sure everything fit with no spacers. I did have to remove my front dust caps to get my center caps to fit. My set up is a sqaure set-up, Rovos Pretoria 20x10 et 38 and Indy 500 275/35-20 with no spacers. My rear camber is only at about -1.3 and I'm petty much flush. I think I could easily fit 285/30 or even a 285/35 under my car with no issues other than taking the rear neg camber to -1.5 to -1.8. There seems to be plenty of room up front. I put on about 25 rigorous miles with absolutely no rubbing. I am on bmr sp080's.

Looks perfect for a 20" set-up. Nicely done.

Sponsored