9 Second full weight cars!

[Ponderthis]

Where's all the high 9 second full weight cars? I should be around 750whp heading to the track this weekend to test out the new converter.. 4000lbs race weight! Mods in sig

Sponsored

 

[kcc0521]

Where's all the high 9 second full weight cars? I should be around 750whp heading to the track this weekend to test out the new converter.. 4000lbs race weight! Mods in sig

You should have no problem getting into the 9s. My car is around 4000 with me in it and I have been in the 9s with much less power since I am on 3.6 pulley and 93+octanium. I need decent air though to hit 9s.

 

[BDMACH1]

I don't have my 9 second slip yet because I have only been to a few no-prep events with the car this year. The weather up here in N.E. Ohio has been pretty crappy on the weekends the last few months.
I have been 6.30's@112-113 in the eight, and one time I ran it out the back, the car went 10.37@143. If I can get a good track and get a chance to play with shocks & tire pressure, I think I can go at least 9.50's...

 

[Tommy V]

I will be in that club soon,so far 10.2 at 139 mph.Little better air and knowing the convertor now it should go high 9's.Hopefully next track.day.

 

[beefcake]

how bout 8 second at 3890?

 

[SAL08HO]

http://www.mustang6g.com/forums/showthread.php?t=92413

My 17 whippled full weight premium ;) car made 764whp without icebox which was added later ! stock tranny,converter,axles and motor!

 

[Tommy V]

http://www.mustang6g.com/forums/showthread.php?t=92413

My 17 whippled full weight premium ;) car made 764whp without icebox which was added later ! stock tranny,converter,axles and motor!

Man i.would still love to know the secret on how u made a stock.convertor 315 gear auto.do a 1.4 6ft.No one has come close to that on a stock convertor,did u have the stock.convertor reflashed??.

 

[higdominator]

Once I get a clutch, transmission, and DS in the car I'm gonna send it and see if I can wedge this pig ass stick car near there.

 

[SAL08HO]

Man i.would still love to know the secret on how u made a stock.convertor 315 gear auto.do a 1.4 6ft.No one has come close to that on a stock convertor,did u have the stock.convertor reflashed??.

Honestly car been doing 1.49-1.46 since first time at the Track , I’m pretty sure Ken did give me a more aggressive tune but don’t know if anything was done for converter, it does take standing on brakes really hard but other than that I have to say Collin at Racing Integration knows his stuff and along with BMR suspensions parts the car is doing fantastic... I have just received the Circle D 2C along with dss800 axles and can’t wait for a Remote Track session tune with PBD to see what we can accomplish on the 3.5 6rib ;) .. Thanks Tommy

 

[GTBOB]

Where’s all the 9 sec, full weight, STICK cars at ????

 

[sonic]

only 2 cars that i know off have pulled that off. leathal and panda everyone else stuck in the 10s

Where’s all the 9 sec, full weight, STICK cars at ????

 

[Barrel]

I'll try and get there in the spring.

 

[kcc0521]

Where’s all the 9 sec, full weight, STICK cars at ????

That is a good question LOL. I think it is hard to keep them in one piece and there are limited drivers with the ability to put them there.

 

[higdominator]

I'm going to give it a shot with a calimer g-force mt82. Should just need to get the car out of the hole and driver mod your way down the track. I think a lot of it is that many people are scared of grenading their trans. or just haven't built the car to be an efficient stick drag car.

 

[Ponderthis]

Those TVS guys with a stock converter must be lucky as hell I grenades the stock converter with a Centri lol... anyway hopefully picking up some 28" Hoosiers this week from summit if 9s doesn't happen it better be 10.0-10.3 haha... stock cats!

Sponsored