Sponsored
SBR70.3's latest activity
-
SBR70.3 replied to the thread The damn fuel pump issue......Yes, I did. I'll definitely ask for help if I need it. -
SBR70.3 replied to the thread The damn fuel pump issue......KPM800 ordered. Hopefully this will fix the issue. Will report next track day.
-
Yes, known issue for people that track the car. Usually high lateral g's and depending if you are on high grip tires/ skill level. When...
-
SBR70.3 posted the thread Testing new products at Hallett today. TL:DR boo DBA, Yay Steeda in Road Course, Track, Autocross, HPDE.Per a different post I made, I decided to try DBA race pads at Hallett today. However, I was left underwhelmed and concerned during the...
-
I run a KPM1000 and its been great. The unit doesn't have an in-tank filter, but they have an option for a filter solution now...
-
The gen3 bucket fill rate from a single saddle side is sufficient at the stock power level on gasoline. Othwise it needs to fill from...
-
SBR70.3 replied to the thread The damn fuel pump issue......I will say the fuel cut is a bit better with the DW400 compared to the stock pump but this cutting over 6500 is new. But I will look...
-
Tracking my M1 today. Hot AF in Oklahoma (100 F by 11 am). I did swap the stock fuel pump out for the DW400 but still having fuel cut...
-
SBR70.3 replied to the thread DBA Race Performance Brake pads....anybody use these yet?.Thank you for this information! Ya, the more I think about it, the more I just want to avoid any issues and put my R16's on and call...
-
SBR70.3 replied to the thread DBA Race Performance Brake pads....anybody use these yet?.I just finished bedding the pads and I’m a bit skeptical of how they will work on track. They are quiet. Like normal street pad quiet...
-
SBR70.3 replied to the thread Does anyone know what sets off engine heat protection / limp mode?.On the 16GT in my sig, the CHT's were a massive issue on track. I think that car went into limp mode around 260 F. No idea what the...
-
SBR70.3 reacted to GTP's post in the thread Does anyone know what sets off engine heat protection / limp mode? with
Haha.
Yeah. Heat. (Sorry, couldn't help myself.) Me: Doctor, whenever I sip my coffee I get a sharp pain in my eye. Doc: Try taking the... -
SBR70.3 replied to the thread DBA Race Performance Brake pads....anybody use these yet?.They are brake pads. I know, I was a bit surprised to see they had pads too. I'm bringing my G-Loc's just in case of any issues...
-
SBR70.3 posted the thread DBA Race Performance Brake pads....anybody use these yet? in Suspension, Brakes & Chassis.I just put these on my Mach 1 and will be testing/reporting on these this Sunday. I have been exclusively using G-Loc R12 and R16 but...
-
SBR70.3 replied to the thread Did a thing! Now regretting it?.My cats lasted about 5k miles after I put the Procharger on. I never upgraded the half shafts on that car, but I never launched it from...
-
SBR70.3 replied to the thread Possible Venturi fuel tank issue.If it is the 2020 GT in his sig, it is in the recall. OP, if you have never removed the necessary parts to access the pumps, there is...
-
https://a.co/d/08pUbRTG
-
SBR70.3 replied to the thread Are headers worth it over just going catless + catback.After trading in a Mustang with catted LTHs I 100% agree with this. The only reason to go to LTHs are if you are running FI and melt...
-
Get some good drill bits and DIY...way cheaper. You can even wrap the hub with some CF vinyl and really it pop.:crackup: Sorry...
-
SBR70.3 replied to the thread Drilled rotors wanted.IMHO, if you want a REALLY good brake porn look, a 2 piece slotted would be the way to go. The Steeda 2 piece is gorgeous. Girodisc...
-
SBR70.3 replied to the thread Guys w/2018 up cars, did putting all 3 Race Louvers RT hood vents on stop the hood flutter? What else did you notice? Thank you..I did get the plates. Fast delivery and they are well made. Thank you! Can you PM me the price for the vents? Agree on the...
-
SBR70.3 replied to the thread Are people just not buying Mustang GTs (or cars for that matter)?.Ya, I just spoke to my insurance agent to inquire about this because my ExST likely has the same "severe, extensive exterior damage"...
-
SBR70.3 replied to the thread Guys w/2018 up cars, did putting all 3 Race Louvers RT hood vents on stop the hood flutter? What else did you notice? Thank you..I need these for my Mach 1! Are they a simple replacement for the stock vents or is there any cutting/drilling involved?
-
SBR70.3 reacted to dasrider's post in the thread Are people just not buying Mustang GTs (or cars for that matter)? with Like.
I'm sure someone more informed than me will confirm, but I believe both can report to Carfax. I don't think all repair shops will report...
-
SBR70.3 replied to the thread Are people just not buying Mustang GTs (or cars for that matter)?.Ya, I also learned that when modifying a car, keep all stock parts and return it to stock before selling. Again, live and learn.
-
SBR70.3 replied to the thread Are people just not buying Mustang GTs (or cars for that matter)?.So, I found out why my car was not selling. I have had a few people show considerable interest in it, but once I gave the VIN they...
-
SBR70.3 replied to the thread Guys w/2018 up cars, did putting all 3 Race Louvers RT hood vents on stop the hood flutter? What else did you notice? Thank you..I really do not want to cut the hood of my Mach 1 and the track I go to doesn't allow me to get to speeds where I've noticed hood...
-
SBR70.3 reacted to Ewheels's post in the thread Guys w/2018 up cars, did putting all 3 Race Louvers RT hood vents on stop the hood flutter? What else did you notice? Thank you. with Love.
Zero flutter and certainly helped with temps. These vents with a small Mishi oil cooler and all my temps are under control (as long as...
-
SBR70.3 replied to the thread Is it worth doing E85 kit.If you track the car and E85 is abundant in your area, then yes, it is 100% worth it. On top of adding a few ponies to your car, it...
-
SBR70.3 reacted to Sader's post in the thread This was fun, went and did an interview about my 2019 GT350 with Like.
My car is Chassis number K0128, still trying to learn the history of my car. Went onto a small youtube channel and had some fun talking...
-
SBR70.3 reacted to RobZ71LM7's post in the thread Do yourselves a favor and check your sway bar end links. with Like.
I recommend Cortex for cars with Magneride. 1/2” more clearance than stock.
-
SBR70.3 replied to the thread An idea of how big our cars are..Exactly! I am not ready to go cutting up my Mach 1 yet, but deleting this stuff would definitely be like Mounjaro for our cars. I...
-
If you want to feel really big, park yours next to a first gen Mustang. They look tiny compared to ours. If they downsized to first gen...
-
SBR70.3 replied to the thread Heel-toe struggles.I admittedly also suck at H-T. One of the best features of my Mach 1 is auto rev matching. Is it perfect? No, but it is MUCH better at...
-
Don't need to if they are the same as stock. Honestly I kind of stopped bedding even with pads from different MFGs. Get on the track...
-
SBR70.3 reacted to NightmareMoon's post in the thread Second HPDE In July - Brake Question for Mach 1 with Like.
If you had brake fade and a soft pedal with Motul, I’d just ask when the Motul was changed last. You sometimes need to bleed or even...
-
SBR70.3 replied to the thread What did you do to your Mach 1 today.I haven't had a chance to take it on the street yet. We had a mini-monsoon in OKC yesterday morning. I will definitely update after my...
-
SBR70.3 reacted to LFSoccer2k6's post in the thread Second HPDE In July - Brake Question for Mach 1 with Like.
I have 12k in mine and have done 6 track days. I’m using OEM rotors and pads and they still have plenty left in them. I’ve only made...
-
SBR70.3 reacted to GTP's post in the thread Second HPDE In July - Brake Question for Mach 1 with Like.
TBH at this point I would make sure I had camber plates and a good alignment ready for the track. I made several posts on the subject...
-
SBR70.3 reacted to KilgoreLSU's post in the thread Second HPDE In July - Brake Question for Mach 1 with Like.
Repeating a lot of above post.. I was at Road Atlanta last weekend and it was pushing high 80's.. so it was hot... I am in HPDE3...
-
SBR70.3 replied to the thread DIY Camber gauge for Steeda plates.How does someone (me) order this tool?
-
SBR70.3 replied to the thread What did you do to your Mach 1 today.I finally got around to installing the Steeda Competition FSB/RSB and Dual Rate Magneride Springs. Tip if you decide to do this: do...
-
SBR70.3 replied to the thread Second HPDE In July - Brake Question for Mach 1.Ya, this 100% depends on how hard you push/brake the car. Personally, I do not think the R8 is enough for this 3800lb pig. If you do...
-
SBR70.3 posted the thread I took Hallett's new social media manager for a ride along. He made this video. in Road Course, Track, Autocross, HPDE.A little taste of HPDE. I wasn't going 10/10 because the track has a hard rule where if you spin, lose control, or go off track with a...
-
SBR70.3 replied to the thread Ford 5.0 Oil Drain Plug Design Change.https://www.uprproducts.com/products/upr-ford-easy-oil-drain-valve-for-mustang-f150-raptor-edge-explorer-bronco This will make your...
-
SBR70.3 replied to the thread An idea of how big our cars are..Agree. The Mustang is no longer a "pony car" and far more of a muscle car. Unfortunately those who track Mustangs are in the minority...
-
I'll just leave this here. Edit: and one thing I should say is I'm about 6'4" and I fit easily in the 944 with a helmet on. Great...
-
SBR70.3 replied to the thread Centrifugal Boost Question - Cats.My N=1 says yes....you will fry your stock cats. I have had the Texas Speed LT headers with their cats on for about 10k miles and have...
-
SBR70.3 replied to the thread An idea of how big our cars are..Get back out there! I am doing the VIP day on 6-20. Not sure which car I am going to take though.
-
Im confused on where your car is in this picture? I see a Corvette in the front, a Porsche second and either a van or station wagon...