Lund Tuning ProCharger Poll

[Chargedguard5.0]

I just talked to my tuner and he said it's making right over 10psi. On 93 octane it was at 623rwhp.

Sponsored

 

[Poppacapp]

Toofless.... make a trip to Florida and let Lund take ker' of it in person.

 

[ProChargerTECH]

HO Kit, and P-1SC-1 rocking right at 700rwhp! Heck ya.

 

[whatsup62]

I just talked to my tuner and he said it's making right over 10psi. On 93 octane it was at 623rwhp.

Is that on the 6 rib belt or did you convert to the 8 rib setup?

 

[Chargedguard5.0]

Is that on the 6 rib belt or did you convert to the 8 rib setup?

6 rib. The stock HO kit just with a 3.4 pulley and E85.

 

[ProChargerTECH]

Is that on the 6 rib belt or did you convert to the 8 rib setup?

Highly doubt it. No reason to make the swap at that boost/power level.

We make a few sizes smaller then a 3.40" pulley in the 6 rib as well.
Just haven't had anyone push the kit that far (the HO that is)

 

[smokinzx14r]

Highly doubt it. No reason to make the swap at that boost/power level.

We make a few sizes smaller then a 3.40" pulley in the 6 rib as well.
Just haven't had anyone push the kit that far (the HO that is)

I can't find the pulley size number on my pulley ..What pulley comes on the HO kit ? If I wanted to add 2 pounds of boost over the stock 8 psi what size pulley would I need ? Would my injectors be able to handle 2 more pounds of boost ?

 

[Chargedguard5.0]

I can't find the pulley size number on my pulley ..What pulley comes on the HO kit ? If I wanted to add 2 pounds of boost over the stock 8 psi what size pulley would I need ? Would my injectors be able to handle 2 more pounds of boost ?

It comes with the 4.0. I would suggest the 3.4 if you want to be at 10lbs. Maybe one size up from the 3.4. I originally went with the 3.85 which is the next size down and was just over 8lbs.

 

[SolarFlare]

Toofless.... make a trip to Florida and let Lund take ker' of it in person.

I thought Lund was up in the northern states??

 

[Poppacapp]

I thought Lund was up in the northern states??

Lund is in Florida I believe? Livernois is up north

 

[SolarFlare]

Lund is in Florida I believe? Livernois is up north

Their phone number area code is 484, I googled and it says Pennsylvania.

 

[Adaraas]

Their phone number area code is 484, I googled and it says Pennsylvania.

I read that too, but everyone talks about going down south to near power by the hour performance for lund.

 

[SolarFlare]

I read that too, but everyone talks about going down south to near power by the hour performance for lund.

Maybe someone can confirm. I know Ken tunes at PBH but I thought he was the PBH tuner who is really familiar with Lund's software.

 

[beefcake]

lund is pa based. sr and jr and greg work out of pa, ken works out of florida, ken is close to pbh though, so he will do some tuning there in person,

lund can remote tune anywhere, we tune with lund at our dyno in ohio on a regular basis

 

[SolarFlare]

lund is pa based. sr and jr and greg work out of pa, ken works out of florida, ken is close to pbh though, so he will do some tuning there in person,

Oh didn't know ken worked for them directly

Sponsored