Anyone interested in Wheel Spacers?

[Jmeo]

They would be just spacers, looks like a washer

Right but when they are used is there enough thread left to safely tighten the lugs and not worry?


Sent from my iPhone using Tapatalk

Sponsored

 

[2Cool]

Right but when they are used is there enough thread left to safely tighten the lugs and not worry?


Sent from my iPhone using Tapatalk

Need 5-7 full turns, so a 3mm to 5mm spacer is about the max I would personally do.

Now a hubcentric wheel adapter, which bolts to the hub then has its own lugs that the wheel attaches to, can be a lot thicker.

 

[Jmeo]

Now a hubcentric wheel adapter, which bolts to the hub then has its own lugs that the wheel attaches to, can be a lot thicker.

Right but you would need around 1.5" thick to swallow the factory studs and this would be too far out.

I may consider the 5mm spacers I guess



Sent from my iPhone using Tapatalk

 

[RubyRed15]

I threw in a vote for 0.1875, but it's a bit of a long shot for me.

 

[SHFTN6]

Update?

 

[Todd15Fastback]

Any updates on this? I need 5mm spacers for my front wheels.

 

[DR_]

I put on these 5mm spacers and got 7 turns on the lugs so they should be safe.

 

[socalsnake]

Will they be hubcentric?

Very interested in a set of 4 @ .1875in

subscribed

 

[derieuz]

Our water jet at work has been down, sorry guys! I'll try to get some made as soon as possible! It should be up and running very soon

 

[socalsnake]

Will they be hubcentric?

Very interested in a set of 4 @ .1875in

subscribed

Re-read the first post...answered my own question. They are hubcentric.

I'm in for a set of 4 @ 0.1875 inch!

 

[Beachfun]

I'm in for a set of 4 @ 5mm (.1875)

 

[derieuz]

Prototype will be made tomorrow, I'll post pictures of the fit and finish!

 

[derieuz]

 

[Bomicino]

Looks good, I'm in. The sloppy universal ones I'm running fit loose on the studs.

 

[Beachfun]

Looks good any before and after pics on the car?

Sponsored