Deatschwerks Fuel Rails

[MSTORMIN919]

I recently got this company's fuel rails with crossover. It doesn't come with any type of installation guide and that's the only part that there isn't an installation guide on their website.
I don't necessarily need a whole guide but a picture of one already installed would be helpful. I called them and the guy that answered acted like I just woke him up and was not helpful.
Mainly, I'd like to know how the factory fuel line connects to the rail.
Anyone have this setup and some pictures to share?
I would greatly appreciate it...
Thanks

Sponsored

 

[horsepower addiction]

It don’t get much easier. This is on a f150 should be almost exactly the same

 

[MSTORMIN919]

ok, so I have seen that and that kit is nothing like the one I have, thats for 2021+ models. I have a 2017 and it did not come with all of those parts. The injectors don't clip in, I do not have a 90° angled piece that the adapter connects to from the rail, no spaces for where the rails bolt in. Definitely not the same and not so easy.

 

[HKusp]

ok, so I have seen that and that kit is nothing like the one I have, thats for 2021+ models. I have a 2017 and it did not come with all of those parts. The injectors don't clip in, I do not have a 90° angled piece that the adapter connects to from the rail, no spaces for where the rails bolt in. Definitely not the same and not so easy.

Take some pics of what you DO have and maybe we will be able to come up with a solution.

 

[horsepower addiction]

Part number?

 

[MSTORMIN919]

7-301-OE

 

[HKusp]

Is that it?

 

[MSTORMIN919]

It is and before you say the 180° fitting is what I connect my fuel line to, its about 2" too short

 

[MSTORMIN919]

 

[HKusp]

The simplest solution would be to cut the OEM hose in the middle and add a barbed 3/8" piece in the middle with some fuel line clamps to hold it in place. It would probably get you the length you need, but you could add a section of fuel line like one of these that @engineermike uses in his solution to the loss of the OEM fuel filter when certain dual fuel pump kits are used.

https://www.mustang6g.com/forums/th...t350-sai-li-fuel-modules.218775/#post-4325026

 

[MSTORMIN919]

Thanks, do you know where I can find that barbed 3/8" piece?

 

[HKusp]

https://www.amazon.com/Fitting-Spli...h+brass+hose+barb,industrial,101&sr=1-11&th=1

 

[MSTORMIN919]

Thank you sir. I was really trying to leave that as is but eff it, I'll keep this car forever.
I appreciate the help. Have a great day

 

[HKusp]

Thank you sir. I was really trying to leave that as is but eff it, I'll keep this car forever.
I appreciate the help. Have a great day

You're welcome. When you go to the autoparts store to get the clamps, make sure you get fuel injector clamps, don't use those worm type clamps. Or just order these type from Amazon, too.

https://www.amazon.com/Rustark-Inje...sc=1&msclkid=7d63207de62a1e84fbde4a32222455cc

 

[MSTORMIN919]

Got it! Thanks again!

Sponsored