Join me for 6 Laps Around Daytona International Speedway in a Mach 1

[allfivefifty]

Hello everyone,

Join me, as I try my best in a stock 2022 Mach 1 6MT around the legendary Daytona International Speedway - Road Course Layout.
SCCA Track Night in America Advance Group - using Apex wheels 19x11 on 305/325 Goodyear F1 3R
Thanks to @Knockdown .

Bonus: See if you can spot the Steeda DH.

Sponsored

 

[flyleclair]

This is awesome and on my bucket list one day! How did you get your Race Render software to work? It won’t overlay the telemetry for me and I read others have the same issue.

 

[allfivefifty]

This is awesome and on my bucket list one day! How did you get your Race Render software to work? It won’t overlay the telemetry for me and I read others have the same issue.

Hello @flyleclair , my set up is a bit complicated. I'm using an OBDLink LX Bluetooth dongle, a Garmin GLO2 also Bluetooth on Android, and a GoPro.
1. For the Track Addict app - assuming you are using supported hardware, then you want to connect the devices in the app via the setup menu. There is a selection for external GPS and for an OBD device (my OBD dongle requires you install a separate app OBDlink...apart from Track Addict otherwise it won't work w/o it) . You'll want to test it by driving around town using a segment layout just to make sure it's working.
2. To overlay it on race render, once you transfer the data to your PC, you can pick from an existing overlay template or create one (what I did). You can pick the different gauges or indicators and select the source data. For example, you can use the car's speedometer or the GPS calculated one. Select the Speed gauge on the template and change the source. Hopefully this helps. Maybe we can create a guide somewhere in the Mustang 6G.

 

[flyleclair]

Hello @flyleclair , my set up is a bit complicated. I'm using an OBDLink LX Bluetooth dongle, a Garmin GLO2 also Bluetooth on Android, and a GoPro.
1. For the Track Addict app - assuming you are using supported hardware, then you want to connect the devices in the app via the setup menu. There is a selection for external GPS and for an OBD device (my OBD dongle requires you install a separate app OBDlink...apart from Track Addict otherwise it won't work w/o it) . You'll want to test it by driving around town using a segment layout just to make sure it's working.
2. To overlay it on race render, once you transfer the data to your PC, you can pick from an existing overlay template or create one (what I did). You can pick the different gauges or indicators and select the source data. For example, you can use the car's speedometer or the GPS calculated one. Select the Speed gauge on the template and change the source. Hopefully this helps. Maybe we can create a guide somewhere in the Mustang 6G.

oh wow. Thank you @allfivefifty. I’m using the TrackAddict app on my iPhone and use the veepeek OBD2 device to sync up with the TrackAddict app. I used this setup 2 years ago with no issues with RaceRender but 2 years later it won’t overlay the telemetry. I read in the RaceRender forum that there is issue and said they were working on a new version but no release date yet. Maybe I will try a different overlay.

 

[Knockdown]

Hello everyone,

Join me, as I try my best in a stock 2022 Mach 1 6MT around the legendary Daytona International Speedway - Road Course Layout.
SCCA Track Night in America Advance Group - using Apex wheels 19x11 on 305/325 Goodyear F1 3R
Thanks to @Knockdown .

Nice one Jaime, pace picked up quite a bit as the laps ticked off!

 

[S14Wolf]

Awesome run! Great laps!

 

[Gen 6 Mach1]

Very nice , Thanks for sharing...

Sponsored