caustin69
Well-Known Member
same ? I had......maybe someone from whipple will chime in??Where's the graph for torque?
Sponsored
same ? I had......maybe someone from whipple will chime in??Where's the graph for torque?
The complete dyno graph is shown beginning at 0:15 in the video below.Where's the graph for torque?
Actually, I believe that was earlier dyno run. I'm sure the torque would be similar.The complete dyno graph is shown beginning at 0:15 in the video below.
Holy heck...664RWHP with 91 octane and 11PSI.Completely Stock 2015 Mustang GT with the Whipple 2.9L Supercharger at 11psi, on 91 Octane, with manual transmission...
![]()
Holy heck...664RWHP with 91 octane and 11PSI.
So realistically, 8psi would net 580-600RWHP. That is freaking crazy running that low of boost putting out that kind of power and an engine that would live a long happy life.
Good on ya Man! Thats great news. I applaud you pulling the hammer. I'm close but still waitind a little longer. I knew a once I read the Ford/Roush install proceedure and the chopping of the K-Brace, I was out for that one. I was in the same boat as you wanting the Ford install/warranty deal.
The reason that I'm holding off a bit on the whipple is I'm waiting to see what the air intake and air box will look like. I've emailed Whipple and they said in a few months the'd have them to show on the web site.
I still don't know if its an open or closed air system. Do you happen to know?
Do you have any idea if the instructions are detailed like the Ford/Roush manual was, inregards to the wire and hose connections?
Do you know if it will require the front end to come off like previously?
Lastly...are you pinned to a Whipple tune with there SC or can you still get a VMP, Ford/Roush, Lund ect tune?
Thanks Jaime! Do you happen to know what size pully your being sent with your system? i.e. 4" = 8lbs. Boost, 3.75" = 10lbs. Ect.As of now I believe it's an open design air box. I've heard they are working on a closed system as well
Instructions for my 05' kit were awesome. In color and easy enough to follow. Almost 200 steps!
I would definitely bet in the front clip coming off. It had to on my 05
You are not pinned to a Whipple tune. As a matter of fact for my 05 kit I got the "tuner" kit (comes without handheld or tune) and I took it to Dez racing in Seekonk, MA and he custom tuned it on the dyno. Dez sent me a generic tune to load via a SCT just to get me there and then he custom tuned it.
You could get the Whipple tune and in the future get a custom one from a local shop
Jaime
Sent from my iPhone using Tapatalk
You're right, it is missing. Here is a pic of my engine bay and you can clearly see it on the right.Dang it! Not trying to cause any alarms here but...
I was looking at the Whipple Youtube video posted by Vernichtung and if you look closely, the K-Brace is missing on the left side of the motor. You can see it though on the right. What the heck?
On the Ford /Roush SC, i can see why because of the intake tube running to the back. But why on the Whipple? I hope I'm wrong! Take a look and tell me what you think.
I'd sure like to see the install manual for the Whipple before I order.