ChitownStang
Well-Known Member
- Joined
- Mar 9, 2015
- Threads
- 75
- Messages
- 2,923
- Reaction score
- 3,510
- Location
- Chicago, North Shore
- Vehicle(s)
- 2021 Mach 1
- Vehicle Showcase
- 1
Thank you for the pics and advice:IDK if the attached will instill confidence, or sew doubt.
2022, M1, HP. On the front, I have a 19x10, +35, LMR wheel with a 285 Michelin.
In one picture, you'll notice the tire flash is just brushing past the strut., firm enough to keep it clean.
In the second photo, the flash measures 15 mm.
I'll make an assumption the flash-to-strut brush is worth 5mm. Let's say you're moving in with a +40. If my assumption is correct, that'd leave about 10mm for tire flex and alignment changes.
This has always been my biggest question/risk with this setup. I can’t find anyone that had done this with stock non-hp wheels.
Even the rears could be in question with a 52.5 offset and 295 but seems to be less of a concern than the fronts.
So frustrating.
I really don’t want to do 275/35 in the front because of the gender gap.
Sponsored