Spacers on stock 20 in wheels.

[Drugdealr]

Howdy y’all. I’m looking at wheels and I can’t seem to find anything I like, my car came with the 20 in painted aluminum wheels, and I’m thinking of just keeping those, but I just want to run a flush set up. What size spacers would I need for that? I might try to put a bigger tire out back just for a meatier sidewall. I’ll be running Eibach Sportlines on Steeda struts and shocks… so I gotta keep rubbing in mind too.

Sponsored

 

[Schwerin]

I think a 20-25 is what you're looking for depending on tire size you go with.

 

[CycloneRy]

I just put Steeda Spacers, 25F 20R, on my car with factory 20" Foundry Wheels. It looks nice although I feel like I should have gone 20 front and rear. I still need to get an alignment, camber correct from the new springs, but I don't think that's going to help on the front at all..

 

[Buck550]

I just put Steeda Spacers, 25F 20R, on my car with factory 20" Foundry Wheels. It looks nice although I feel like I should have gone 20 front and rear.

Where did you get the 20” spacers. I’ve been look for those for my car.
I have these 20” wheels and I want to keep them also.

 

[CycloneRy]

These are the Steeda 20mm spacers I used on the rear.

https://www.steeda.com/steeda-s550-wheel-spacer-555-6610

My fronts are technically 1" spacers (25.4mm).

 

[shogun32]

I feel like I should have gone 20 front and rear

I'd wager you want a 15mm instead for the front, maybe a 20 but only if you configure for 2deg camber.

 

[Drugdealr]

I just put Steeda Spacers, 25F 20R, on my car with factory 20" Foundry Wheels. It looks nice although I feel like I should have gone 20 front and rear. I still need to get an alignment, camber correct from the new springs, but I don't think that's going to help on the front at all..

Didn’t have to trim the studs?

 

[CycloneRy]

Didn’t have to trim the studs?

No trimming necessary. These are 2016 versions of the 20" wheels. I think the specs and pockets are the same on the 2021's

 

[CycloneRy]

No trimming necessary. These are 2016 versions of the 20" wheels. I think the specs and pockets are the same on the 2021's

I also don't have the fancy MagneRide suspension.. I think you'll need to trim the front on a MagneRide car.

 

[Drugdealr]

I also don't have the fancy MagneRide suspension.. I think you'll need to trim the front on a MagneRide car.

Hopefully that’s the case. Yeahs the one thing I don’t have in my car since it’s not a PP car. Got everything else tho. I’ve been toying with the idea of having the wheels powder coated red too. I’m all over the place

 

[shogun32]

I’ve been toying with the idea of having the wheels powder coated red too. I’m all over the place

get a photo editor, take a good quality pic of your car in sunlight and visit your local PC and take pics (in sunlight if you can) of their color samples. And then you can use the tools to transcribe the color swatches and apply to the car picture.

Red with Orange car though, I don't think that would be a good match. Blue, green, pink, white, maybe yellow, or medium-light gray. Maybe if your red is a 'fire/burnt red' that might work.

 

[Drugdealr]

get a photo editor, take a good quality pic of your car in sunlight and visit your local PC and take pics (in sunlight if you can) of their color samples. And then you can use the tools to transcribe the color swatches and apply to the car picture.

Red with Orange car though, I don't think that would be a good match. Blue, green, pink, white, maybe yellow, or medium-light gray. Maybe if your red is a 'fire/burnt red' that might work.

Orange car has been long gone I have a antimatter blue now that I just picked up about a week ago.
thinking about that Superman spec lol

 

[shogun32]

Orange car has been long gone

update profile pic? dark blue/black with red wheels is a very nice combo.

 

[Drugdealr]

update profile pic? dark blue/black with red wheels is a very nice combo.

I will once I get some nice pictures of the car. It’s back at the dealer for some warranty work right now, as my truck was horribly misaligned and scraped paint of the c pillar

 

[Paulb909]

I have the same wheels on my 2015 and I think my rear looks fine, but my front looks a little funky to me. But I did just get the car 2 days ago.

Sponsored